CA-30/1000 - TV signal amplifier Steren - Free user manual and instructions
Find the device manual for free CA-30/1000 Steren in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | TV Signal Amplifier |
| Brand | Steren |
| Model | CA-30/1000 |
| Amplifier Gain | 30 dB |
| Frequency Range | 40 to 1000 MHz |
| Input/Output Impedance | 75 Ohms |
| Connector Type | F-type (coaxial) |
| Number of Outputs | 1 |
| Power Supply | 12V DC, 100 mA (via adapter) |
| Power Consumption | 1.2 W |
| Dimensions (W x H x D) | 100 x 60 x 25 mm |
| Weight | 120 g |
| Mounting | Wall mountable |
| Indoor Use | Yes |
| LED Indicator | Power LED |
| Operating Temperature | 0 to 45°C |
| Noise Figure | Low noise figure for clear reception |
| Maintenance | Clean with a dry, soft cloth. Disconnect power before cleaning. |
| Safety | Indoor use only. Protect from moisture and extreme temperatures. |
| Spare Parts and Repairability | Contact local Steren service center for replacement parts and repairs. |
| Compliance | CE, RoHS |
Frequently Asked Questions - CA-30/1000 Steren
How do I connect the Steren CA-30/1000 TV signal amplifier?
Connect the coaxial cable from your antenna to the input (IN) port of the amplifier, and then connect another coaxial cable from the output (OUT) port to your TV or receiver. Ensure all connections are tight.
What power supply does the CA-30/1000 require?
The amplifier requires a 12V DC power adapter with a minimum current of 100 mA. Use only the adapter supplied or one with matching specifications to avoid damage.
Can I use this amplifier outdoors?
No, the CA-30/1000 is designed for indoor use only. Exposing it to moisture or extreme weather conditions could cause malfunction or damage.
What is the maximum signal gain of this amplifier?
The maximum gain is 30 dB, which significantly boosts weak TV signals. However, excessive gain can cause overload, so adjust the gain (if adjustable) or positioning appropriately.
Does this amplifier support digital TV signals?
Yes, the amplifier works with both analog and digital TV signals in the 40 to 1000 MHz frequency range, covering most terrestrial, cable, and satellite IF signals.
How do I know if the amplifier is working?
When powered on, the LED indicator should light up. If it doesn't, check the power adapter and connections. If the LED remains off, the amplifier may be faulty.
Can I connect multiple TVs to this amplifier?
The CA-30/1000 has one output, so it is designed for a single TV or receiver. To connect multiple TVs, you would need a distribution amplifier or a splitter after the amplifier.
Why do I see interference or pixelation after adding the amplifier?
Interference or pixelation may occur if the signal is too strong (overload) or if the amplifier is placed too close to other electronic devices. Try moving the amplifier away from sources of interference and ensure cables are properly shielded.
How should I clean and maintain the amplifier?
Disconnect the amplifier from power before cleaning. Use a dry, soft cloth to wipe the exterior. Avoid using liquids or abrasive cleaners that could damage the device.
Where can I get replacement parts or repair service?
Contact the nearest Steren service center or authorized dealer. You can find contact information on the official Steren website. Repairs should only be performed by qualified personnel.
User questions about CA-30/1000 Steren
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your TV signal amplifier in PDF format for free! Find your manual CA-30/1000 - Steren and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CA-30/1000 by Steren.
USER MANUAL CA-30/1000 Steren
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Steren
Model : CA-30/1000
Category : TV signal amplifier