POE-GSH800-120-BT - Uncategorized AIRLIVE - Free user manual and instructions
Find the device manual for free POE-GSH800-120-BT AIRLIVE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 8-Port Gigabit PoE++ Switch |
| Brand | AirLive |
| Model | POE-GSH800-120-BT |
| Ethernet Ports | 8× 10/100/1000 Mbps RJ45 auto-negotiation |
| PoE Standard | IEEE 802.3af/at/bt |
| PoE Power Budget | 120W total across all ports |
| PoE Power per Port | Up to 30W (PoE+), up to 60W (PoE++) |
| Switching Capacity | 16 Gbps non-blocking |
| Packet Forwarding Rate | 11.9 Mpps |
| MAC Address Table | 8K entries |
| Dimensions | 250 mm × 150 mm × 44 mm |
| Weight | 1.2 kg |
| Power Supply | Internal AC 100-240V, 50/60Hz |
| Housing | Metal case with rackmount ears |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Cooling | Smart fan for efficient ventilation |
| Management | Unmanaged, plug-and-play operation |
| Surge Protection | 4kV surge protection on Ethernet and power lines |
| Safety Features | Over-current, over-voltage and short-circuit protection |
| Maintenance & Cleaning | Disconnect power, wipe with dry antistatic cloth; keep air vents clear |
| Repairability | No user-serviceable parts; contact AirLive support for repair or spare parts |
| Warranty | 2-year limited hardware warranty |
| Certifications | CE, FCC, RoHS |
Frequently Asked Questions - POE-GSH800-120-BT AIRLIVE
What is the total PoE power budget of the AirLive POE-GSH800-120-BT?
The switch provides a total PoE power budget of 120W across all eight Gigabit ports. This allows you to power multiple IP cameras, access points, and VoIP phones simultaneously.
Does the POE-GSH800-120-BT support non-PoE devices?
Yes, each port supports auto-detection for PoE. If a connected device is not PoE-capable, the port only supplies Ethernet data, preventing damage.
What is the maximum cable length for PoE?
The maximum recommended cable length is 100 meters (328 feet) for both data and power using standard Cat5e or Cat6 Ethernet cable.
How do I reset or troubleshoot this switch?
As an unmanaged switch, it operates plug-and-play. If a PoE device is not powering, check the Ethernet cable, verify the device's power requirements are within the 30W/60W per-port limit, and ensure total consumption does not exceed 120W.
Can the switch be rack-mounted?
Yes, the metal housing includes rackmount ears for installation in a standard 19-inch network cabinet, in addition to desktop placement.
What safety precautions should be followed when installing?
Connect to a grounded AC power outlet, avoid exposing the switch to moisture, and do not block the ventilation openings. Use a surge protector to guard against voltage spikes.
Does this switch require configuration?
No, it is an unmanaged switch with no manual setup. Simply connect devices and power it on; it automatically negotiates speed and PoE delivery.
What type of Ethernet ports are available?
The switch is equipped with 8× Gigabit RJ45 ports supporting 10/100/1000 Mbps speeds and auto-MDIX, so straight-through or crossover cables work without issue.
Can I use the switch with a UPS?
Yes, the switch can be powered from a UPS via its AC input. This ensures continuous operation of your network and PoE devices during short outages.
What maintenance is recommended?
Clean the exterior with a dry, antistatic cloth and periodically check that the ventilation grills are free of dust. For internal servicing, always consult certified technicians.
User questions about POE-GSH800-120-BT AIRLIVE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual POE-GSH800-120-BT - AIRLIVE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. POE-GSH800-120-BT by AIRLIVE.