XL-82SST - Loudspeaker PowerBass - Free user manual and instructions
Find the device manual for free XL-82SST PowerBass in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | PowerBass |
| Model | XL-82SST |
| Product Type | 8-inch subwoofer for car audio |
| Nominal Diameter | 8 inches (200 mm) |
| Peak Power Handling | 250 watts |
| RMS Power Handling | 125 watts |
| Impedance | 4 ohms single voice coil |
| Frequency Response | 30 - 500 Hz |
| Sensitivity | 89 dB @ 1W/1m |
| Cone Material | Injection-molded polypropylene |
| Surround Material | High-damping rubber |
| Basket Type | Pressed steel |
| Voice Coil Diameter | 1.5 inches (38 mm) |
| Magnet Weight | 25 oz (700 g) |
| Mounting Depth | 4.5 inches (114 mm) |
| Mounting Cutout Diameter | 7.1 inches (180 mm) |
| Overall Diameter | 8.1 inches (206 mm) |
| Weight | 5.5 lbs (2.5 kg) |
| Recommended Enclosure (Sealed) | 0.5 cubic feet (14 liters) |
| Recommended Enclosure (Ported) | 0.8 cubic feet (23 liters) tuned to 35 Hz |
| Recommended Amplifier Power | 100 - 200 watts RMS |
| Terminals | Spring-loaded push terminals |
| Maintenance | Wipe with a dry, soft cloth only |
| Safety | Do not expose to moisture or extreme heat |
| Repairability | No user-serviceable parts; contact qualified service center |
Frequently Asked Questions - XL-82SST PowerBass
What is the power handling of the PowerBass XL-82SST?
The XL-82SST handles up to 250 watts peak power and 125 watts RMS. A recommended amplifier power range is 100-200 watts RMS for optimal performance.
What is the impedance of this subwoofer?
The subwoofer has a 4-ohm single voice coil, making it easy to connect to most car audio amplifiers with a 4-ohm load.
What type of enclosure is recommended?
For best results, use a sealed enclosure of 0.5 cubic feet or a ported enclosure of 0.8 cubic feet tuned to 35 Hz. Both options will deliver solid bass response.
Can I install the XL-82SST in my car's factory location?
It depends on the mounting depth and cutout diameter. The mounting depth is 4.5 inches and the cutout diameter is 7.1 inches. Check if your vehicle's space accommodates these dimensions.
How do I break in the subwoofer?
To break in the subwoofer, play music at moderate volume (25-50% of max) for the first 10-15 hours. This allows the suspension to loosen and improves overall sound quality.
What is the frequency response of this speaker?
The XL-82SST reproduces frequencies from 30 Hz to 500 Hz, making it ideal for sub-bass and low midrange. It is best used with a crossover set around 80-100 Hz for subwoofer duties.
How should I clean and maintain the subwoofer?
Use a dry, soft cloth to gently dust the cone and surround. Avoid any moisture, solvents, or harsh cleaners, as they can damage the materials.
What is the recommended amplifier power?
PowerBass recommends using an amplifier that delivers 100 to 200 watts RMS at 4 ohms. This ensures headroom without risking damage to the subwoofer.
Can I use this subwoofer for home audio?
While designed for car audio, the XL-82SST can be used in a home theatre subwoofer enclosure if the impedance and power requirements are matched with an appropriate home amplifier.
What are the physical dimensions of the XL-82SST?
The overall diameter is 8.1 inches (206 mm), the mounting cutout is 7.1 inches (180 mm), and the mounting depth is 4.5 inches (114 mm). It weighs approximately 5.5 lbs (2.5 kg).
User questions about XL-82SST PowerBass
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual XL-82SST - PowerBass and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. XL-82SST by PowerBass.
USER MANUAL XL-82SST PowerBass
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PowerBass
Model : XL-82SST
Category : Loudspeaker