Medidor de Fluxo - Measurement G-Tech - Free user manual and instructions
Find the device manual for free Medidor de Fluxo G-Tech in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Flow meter |
| Brand | G-Tech |
| Model | Medidor de Fluxo |
| Category | Measurement instruments |
| Measurement parameter | Flow rate |
| Measurement units | L/min, m³/h, GPM |
| Display | LCD digital display with backlight |
| Accuracy | ±2% of full scale |
| Resolution | 0.1 L/min |
| Flow range | 0.5 to 50 L/min |
| Max pressure | 1.0 MPa (10 bar) |
| Operating temperature | 0°C to 50°C |
| Storage temperature | -10°C to 60°C |
| Power supply | 2 x AAA batteries (1.5V) |
| Battery life | Approximately 200 hours of continuous use |
| Body material | High-impact ABS plastic |
| Connection size | 1/2" BSP threaded ends with adapters |
| Ingress protection | IP65 (dust-tight and splash-proof) |
| Data logging | Stores up to 100 measurement records |
| Weight | 200 g (without batteries) |
| Dimensions | 120 x 70 x 30 mm |
| Accessories included | User manual, 2 x AAA batteries, thread adapters |
| Warranty | 1-year limited warranty against defects |
Frequently Asked Questions - Medidor de Fluxo G-Tech
How do I install the flow meter correctly?
Install the flow meter in a straight section of the pipe, ensuring the direction of flow matches the arrow on the body. Use the provided BSP thread adapters and seal the threads with PTFE tape to prevent leaks.
Can this flow meter measure both liquids and gases?
This device is designed primarily for clean liquids such as water. Do not use it with gases, as the measurement accuracy and internal components may be damaged.
How do I change the measurement units?
Press and hold the Unit button for 3 seconds to cycle through L/min, m³/h, and GPM. The selected unit will appear on the LCD display.
Why does the display show an error code E1?
Error E1 indicates low battery. Replace both AAA batteries with new ones, making sure the polarity is correct. The error should clear automatically.
How often should I calibrate the flow meter?
For most applications, recalibration is recommended every 12 months or after significant physical shock. If you notice a drift in readings, compare against a known reference or contact G-Tech support.
What is the maximum operating pressure?
The maximum operating pressure is 1.0 MPa (10 bar). Exceeding this pressure can permanently damage the sensor and voids the warranty.
Can I use the flow meter with hot water?
The operating temperature range is 0°C to 50°C. Using it with liquids above 50°C may cause inaccurate readings and damage the internal components.
How do I clean the flow meter?
Wipe the exterior with a soft, damp cloth. Do not use solvents or abrasive cleaners. For the interior, flush with clean water after use if measuring non-potable liquids, and remove the batteries before cleaning.
Does the flow meter store measurement history?
Yes, it can store up to 100 records with date and time stamps. Use the Log button to save the current reading, and recall it by pressing the Memory button.
Can I repair the flow meter myself if it malfunctions?
The device is not serviceable by the user. Opening the housing will void the warranty. For repairs, contact G-Tech authorized service centers for genuine replacement parts and professional service.
User questions about Medidor de Fluxo G-Tech
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measurement in PDF format for free! Find your manual Medidor de Fluxo - G-Tech and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Medidor de Fluxo by G-Tech.
USER MANUAL Medidor de Fluxo G-Tech
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : G-Tech
Model : Medidor de Fluxo
Category : Measurement