ALF-WP70S-UB - Switch Alfatron - Free user manual and instructions
Find the device manual for free ALF-WP70S-UB Alfatron in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Switch |
| Brand | Alfatron |
| Model | ALF-WP70S-UB |
| Ports | 8 x 10/100/1000 Mbps Ethernet |
| Switching Capacity | 16 Gbps |
| Forwarding Rate | 11.9 Mpps (64-byte packets) |
| MAC Address Table | 8K entries |
| Mounting | Wall-mountable compact design |
| Dimensions (W x D x H) | 135 x 75 x 28 mm |
| Weight | 180 g |
| Input Power | 5V DC, 1A |
| Power Consumption | Max 4.5W |
| LED Indicators | Power, Link/Activity per port |
| Standards | IEEE 802.3, 802.3u, 802.3ab |
| Flow Control | IEEE 802.3x full-duplex and backpressure half-duplex |
| Cable Support | Cat5e, Cat6, Cat6a |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 70°C |
| Housing | Durable plastic,vented for cooling |
| Cleaning Instructions | Wipe with a soft dry cloth; do not use liquids or solvents |
| Safety Features | Overcurrent protection, surge protection |
| Spare Parts & Repairability | Modular power adapter; internal components not field-serviceable |
| Warranty | 2 years limited |
Frequently Asked Questions - ALF-WP70S-UB Alfatron
How to install the ALF-WP70S-UB switch?
Mount the switch on a wall using the provided screw brackets, or place it on a flat surface. Connect the power adapter to a nearby outlet, then connect your Ethernet cables to the ports. The switch is plug-and-play and requires no software setup.
What is the maximum data transfer speed?
Each port supports up to 1000 Mbps (Gigabit Ethernet) in full duplex, allowing high-bandwidth data transfer for demanding applications.
Does the switch support Power over Ethernet (PoE)?
No, the ALF-WP70S-UB is a non-PoE switch. Devices requiring power over Ethernet must be powered separately.
Can it be mounted on the wall?
Yes, the switch has a compact wall-mount design with screw holes on the bottom panel for secure installation.
How do I connect it to my router?
Connect any Ethernet cable from your router’s LAN port to one of the switch ports. Then connect your devices to the remaining ports. All ports are auto-MDI/MDIX, so cable type is not a concern.
What do the LED indicators mean?
The Power LED lights when the switch is on. Each port has a Link/Activity LED: steady LED indicates a link, blinking indicates data activity.
Does it support IPv6?
Yes, the switch is layer 2 and works transparently with IPv4 and IPv6 packets. It forwards traffic based on MAC addresses, so all IP versions are supported.
Is the switch plug-and-play?
Absolutely. The ALF-WP70S-UB requires no configuration. Just connect power and Ethernet cables, and the network is ready.
How to reset the switch?
The switch has no reset button and does not retain any settings. To reset, simply power cycle it by disconnecting and reconnecting the power adapter.
What is the power consumption?
The switch consumes a maximum of 4.5W, making it energy-efficient. It supports IEEE 802.3az Energy Efficient Ethernet for reduced power usage during low traffic.
User questions about ALF-WP70S-UB Alfatron
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual ALF-WP70S-UB - Alfatron and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ALF-WP70S-UB by Alfatron.
USER MANUAL ALF-WP70S-UB Alfatron
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Alfatron
Model : ALF-WP70S-UB
Category : Switch