GAT-1SUB - Loudspeaker FoneStar - Free user manual and instructions
Find the device manual for free GAT-1SUB FoneStar in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Loudspeaker (Subwoofer) |
| Brand | FoneStar |
| Model | GAT-1SUB |
| Speaker Type | Active subwoofer |
| Frequency Response | 30 Hz - 250 Hz |
| Impedance | 4 ohms |
| Maximum Power Output | 120 W |
| Driver Size | 8 inches (20 cm) |
| Enclosure Type | Bass reflex (ported) |
| Connectivity | Wired (RCA inputs) |
| Controls | Volume, crossover, phase |
| Power Supply | AC 100-240V, 50/60Hz |
| Power Consumption | 50 W |
| Auto Standby | Yes |
| Dimensions | 32 x 22 x 16 cm (12.6 x 8.7 x 6.3 in) |
| Weight | 3.4 kg (7.5 lbs) |
| Color | Black |
| Cleaning Instructions | Wipe with soft dry cloth |
| Safety Warnings | Do not expose to moisture or heat |
| Repair Information | No user-serviceable parts; contact qualified service |
| Recommended Use | Home theater systems |
Frequently Asked Questions - GAT-1SUB FoneStar
How do I connect the FoneStar GAT-1SUB to my receiver?
Use an RCA cable to connect the subwoofer's L/R input to the subwoofer output of your receiver. Make sure the receiver's SW output is enabled.
Does the GAT-1SUB support wireless connections?
No, the GAT-1SUB is a wired subwoofer. It requires a physical connection via RCA or speaker wire.
What is the power output of the subwoofer?
The built-in amplifier delivers up to 120 watts peak power, adequate for small to medium-sized rooms.
How do I clean the loudspeaker?
Use a soft, dry cloth to wipe the enclosure. Avoid using liquids or abrasive cleaners.
What should I do if there is no sound?
Check the power cord and RCA connections. Ensure the subwoofer is turned on and the volume is not at zero. Also verify that the receiver's subwoofer output is active.
Is there an auto standby function?
Yes, the subwoofer automatically enters standby mode when no audio signal is detected for a few minutes.
Can I adjust the crossover frequency?
Yes, the back panel includes a crossover control from 40 Hz to 160 Hz to blend with your main speakers.
What is the frequency response?
The GAT-1SUB reproduces frequencies from 30 Hz to 250 Hz, focusing on deep bass effects.
Is the subwoofer shielded?
Yes, the subwoofer is magnetically shielded to minimize interference with nearby electronics.
What is the warranty period?
FoneStar offers a standard 1-year limited warranty. Please contact the retailer for warranty claims.
User questions about GAT-1SUB FoneStar
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual GAT-1SUB - FoneStar and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GAT-1SUB by FoneStar.
USER MANUAL GAT-1SUB FoneStar
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : FoneStar
Model : GAT-1SUB
Category : Loudspeaker