TS-4 - Speaker selector Taga Harmony - Free user manual and instructions
Find the device manual for free TS-4 Taga Harmony in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Speaker Selector |
| Brand | Taga Harmony |
| Model | TS-4 |
| Number of Speaker Pairs | 4 |
| Maximum Power Handling | 200 W per channel |
| Impedance Compatibility | 4–16 Ω |
| Frequency Response | 10 Hz – 50 kHz |
| Input Connections | 1 pair of speaker input binding posts |
| Output Connections | 4 pairs of speaker output binding posts |
| Speaker Selection | Rotary switch with 4 positions + off |
| Protection Circuitry | Short-circuit and overload protection |
| Construction | High-quality metal chassis |
| Dimensions (W×H×D) | 220 × 70 × 180 mm |
| Weight | 1.2 kg |
| Operating Temperature | 0°C – 40°C |
| Installation | Free-standing or mounted |
| Maintenance | Wipe with a dry cloth |
| Safety Features | Durable gold-plated binding posts |
| Warranty | 2 years (refer to seller) |
| Repairability | Modular design; spare parts available |
Frequently Asked Questions - TS-4 Taga Harmony
How many speaker pairs can I connect to the Taga Harmony TS-4?
You can connect up to four pairs of speakers to the TS-4. Each pair is connected to a separate output terminal, allowing you to manage multiple speaker zones.
What is the maximum power handling of the TS-4?
The TS-4 is designed to handle up to 200 watts per channel, making it suitable for most home audio systems. Always ensure your amplifier output does not exceed the rated maximum to avoid damage.
Can I use the TS-4 with both 8-ohm and 4-ohm speakers?
Yes, the TS-4 supports speakers with an impedance of 4 to 16 ohms. It includes built-in impedance protection to minimize the risk of overloading your amplifier when multiple pairs are used.
How do I connect the TS-4 to my amplifier and speakers?
Use speaker wires to connect your amplifier's speaker terminals to the input terminals of the TS-4. Then connect each speaker pair to the corresponding output terminals. Ensure all connections are tight and secure.
Does the TS-4 require AC power?
No, the TS-4 is a passive device and does not require an external power supply. It simply switches the speaker connections mechanically.
Can I listen to two speaker pairs simultaneously?
Yes, the TS-4 allows you to select one, two, three, or all four speaker pairs simultaneously, depending on the position of the rotary switch. This lets you play music in multiple rooms at once.
Will using multiple speakers damage my amplifier?
When used correctly, the TS-4's protection circuitry helps prevent amplifier damage by managing impedance loads. Avoid connecting speakers below the recommended impedance, and do not exceed the total power rating.
What types of speaker wire should I use with the TS-4?
Use high-quality speaker cable with a gauge appropriate for the distance (e.g., 14 AWG for longer runs). Ensure the wire is properly stripped and connected to the binding posts without shorting.
Is the TS-4 compatible with bi-wiring or bi-amping?
The TS-4 is intended for standard single-wire connections. For bi-wiring, you would need double cable sets, but the selector's outputs are not split. We recommend using a single wire per pair.
How should I clean and maintain the TS-4?
Disconnect all cables, then wipe the unit with a dry soft cloth. Avoid using liquids, solvents, or abrasive cleaners. Periodically check and tighten the binding posts to ensure good contact.
User questions about TS-4 Taga Harmony
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Speaker selector in PDF format for free! Find your manual TS-4 - Taga Harmony and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TS-4 by Taga Harmony.
USER MANUAL TS-4 Taga Harmony
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Taga Harmony
Model : TS-4
Category : Speaker selector