Neutron - Fan HUNTER - Free user manual and instructions
Find the device manual for free Neutron HUNTER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Ceiling Fan |
| Brand | Hunter |
| Model | Neutron |
| Blade Sweep | 52 inches |
| Number of Blades | 5 |
| Blade Finish | Reversible, dual-finish (Matte Black / Brushed Nickel) |
| Motor | Quiet, reversible DC motor |
| Airflow | Up to 5,000 CFM |
| Number of Speeds | 6 speed settings |
| Control | Handheld remote control included |
| Reverse Function | Switchable for summer and winter operation |
| Light Kit | Compatible with optional LED light kit |
| Mounting Type | Standard, angled, or flush mount capable |
| Downrod Length | 3 inches included (extensions available) |
| Dimensions | 52 x 52 x 12 inches |
| Weight | 16.5 pounds |
| Power Supply | 120V, 60Hz |
| Material | Steel and ABS plastic |
| Cleaning | Wipe with a dry or slightly damp cloth |
| Safety Rating | UL listed |
| Warranty | Limited lifetime motor warranty |
Frequently Asked Questions - Neutron HUNTER
How do I install the Hunter Neutron ceiling fan?
Turn off the power at the circuit breaker, assemble the blades to the motor housing, mount the bracket to the ceiling, and hang the fan. Connect the wires by matching colors (black to black, white to white, green to ground), then attach the canopy and install the remote receiver. Always follow the included manual.
Can the Hunter Neutron be mounted on a sloped ceiling?
Yes, the Neutron supports angled mounting up to 30 degrees. For extremely low ceilings, use the flush mount option or order a shorter downrod.
How do I clean the fan blades?
Use a soft, dry microfiber cloth to gently wipe the blades. For stubborn dirt, slightly dampen the cloth with water or a mild detergent. Never use abrasive cleaners or immerse the blades in water.
Why is my fan making a clicking noise?
Check if the blades are securely attached and balanced. Loose screws or slight warping can cause noise. Tighten all fasteners, and if the issue persists, use the included balancing kit to correct blade alignment.
How do I change the fan direction for winter?
Locate the reverse switch on the motor housing (or use the remote control). Flip it to run in the opposite direction. In winter, run the fan clockwise at a low speed to push warm air down from the ceiling.
What should I do if my remote control stops working?
First, replace the batteries in the remote. If that fails, turn off the fan and power, reset the fan by disconnecting it for 10 seconds, then reprogram the remote by pressing the 'pairing' button. Refer to the manual for exact steps.
Does the Hunter Neutron include a light fixture?
The standard Neutron model does not include a light, but it is compatible with Hunter's optional LED light kits. Install the kit between the motor and the switch housing for added illumination.
Can I use the fan with a dimmer switch?
The fan motor is not designed for use with standard dimmers. Use only the supplied remote control or a Hunter-approved fan speed control to avoid damage and ensure safe operation.
What are the warranty terms for this fan?
Hunter offers a limited lifetime warranty on the motor and a one-year warranty on parts. The warranty covers defects in materials and workmanship, but not normal wear, misuse, or improper installation.
How many CFM does this fan move?
At high speed, the Neutron delivers up to 5,000 CFM of airflow, making it suitable for medium to large rooms up to 400 square feet.
User questions about Neutron HUNTER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Fan in PDF format for free! Find your manual Neutron - HUNTER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Neutron by HUNTER.