Audibax

Smoke 700 LED - Effects machine Audibax - Free user manual and instructions

Find the device manual for free Smoke 700 LED Audibax in PDF.

📄 2 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Audibax Smoke 700 LED - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Effects machine (smoke machine with LED lighting)
Brand Audibax
Model Smoke 700 LED
Heater Power 700 W
Warm-up Time Approximately 6 to 8 minutes
Fluid Capacity 1.5 liters
Smoke Output Adjustable volume, up to 60 m³/min
LED Effects Multicolor RGB LED lighting with strobe effect
Remote Control Included wireless remote for smoke and LED control
Power Supply AC 110-240V, 50/60Hz
Power Consumption 800 W (heater + LED)
Dimensions (L x W x H) 35 x 25 x 18 cm
Weight 4.5 kg
Recommended Fluid Water-based smoke fluid (low density)
Operation Continuous smoke output with timer and automatic interval modes
Housing Material High-strength ABS plastic
Cooling System Built-in fan for rapid cooldown
Safety Features Thermal fuse overheat protection and low-fluid sensor
Maintenance Clean tank and heating chamber with diluted vinegar solution after every 20 hours of use
Spare Parts Heating element, fuse, pump, and fluid tank are replaceable
Included Accessories Wireless remote, user manual, and 1L smoke fluid bottle
Reparability Modular design with accessible components for easy servicing
Warranty 2-year limited warranty against manufacturing defects

Frequently Asked Questions - Smoke 700 LED Audibax

How do I set up the Smoke 700 LED for the first time?
Place the machine on a flat, stable surface. Fill the fluid tank with water-based smoke fluid up to the MAX mark, plug in the power cord, and switch on the machine. Wait for the warm-up period (about 6-8 minutes) until the LED indicator shows ready.
What type of smoke fluid should I use?
Only use high-quality water-based smoke fluid specifically designed for low-density smoke machines. Avoid oil-based fluids as they can damage the heating element and produce hazardous fumes.
How do I connect the wireless remote?
Insert the included 23A 12V battery into the remote. The machine automatically pairs with the remote within seconds of powering on. Use the buttons to turn smoke on/off and to cycle through LED color modes.
Why is the smoke output weak or the machine not producing smoke?
Weak output is often due to a clogged heating element or low fluid level. First check the fluid tank, then run a cleaning cycle with a mixture of 20% vinegar and 80% water. If the problem persists, the heating element may need replacement.
Can I use the smoke machine outdoors?
Yes, but only in well-ventilated areas. Avoid using it in direct rain or extreme wind, as this can affect smoke dispersal and potentially damage the electronic components.
How often should I clean the machine?
Regular cleaning is recommended after every 20 hours of use. Empty the remaining fluid and run the machine with a cleaning solution (vinegar and water) to dissolve residue in the heating chamber and pump.
What safety precautions should I take?
Keep the machine away from flammable materials and do not block the vents. The output nozzle can be hot during operation—allow at least 30 minutes to cool down before touching. Use only the provided grounded plug.
How do I control the LED lighting effects?
Use the remote control or the buttons on the back panel to cycle through steady colors, fading, and strobe effects. The LED operates independently from the smoke function.
What does the low-fluid sensor do?
The sensor automatically shuts off the pump when the fluid level drops below a safe minimum, preventing the heater from overheating and extending the machine's lifespan.
Can I replace the fuse or heating element myself?
Yes, but only if you are comfortable with basic electronics. Always unplug the unit first. Use the specified fuse rating (10A, 250V) and original replacement parts. If you are unsure, contact Audibax support for assistance.

User questions about Smoke 700 LED Audibax

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Effects machine in PDF format for free! Find your manual Smoke 700 LED - Audibax and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Smoke 700 LED by Audibax.

USER MANUAL Smoke 700 LED Audibax

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Audibax

Model : Smoke 700 LED

Category : Effects machine