AFX

Noah NOAP3010MBDG - Ignition AFX - Free user manual and instructions

Find the device manual for free Noah NOAP3010MBDG AFX in PDF.

📄 1 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice AFX Noah NOAP3010MBDG - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Type of Product Ignition Control Module
Brand AFX
Model Noah NOAP3010MBDG
Category Ignition
Dimensions (L x W x H) 4.5 x 3.0 x 1.5 inches (114 x 76 x 38 mm)
Weight 0.5 lbs (230 g)
Power Supply 24V AC (50/60 Hz)
Ignition Type Direct Spark Ignition
Flame Sensing Flame Rectification (micro-amp detection)
Spark Output High-energy spark (10 kV minimum)
Operating Temperature Range -40°F to 175°F (-40°C to 80°C)
Mounting Surface-mount with included bracket
Compatibility Gas-fired heating systems and appliances
Safety Features Flame failure lockout, spark retry with inter-purge
Maintenance Clean spark electrode and flame sensor annually
Spare Parts Replacement spark electrodes and sensors available
Repair Field-serviceable; repair kit available
Warranty 1-year limited warranty
Certifications ANSI Z21.20 / CSA 6.3 compliant

Frequently Asked Questions - Noah NOAP3010MBDG AFX

What type of ignition system does the Noah NOAP3010MBDG use?
The Noah NOAP3010MBDG uses a direct spark ignition system. It generates a high-energy spark to ignite the gas burner directly, without a standing pilot light.
How do I install the AFX Noah NOAP3010MBDG ignition module?
Installation should be done by a qualified technician. Mount the module using the provided bracket, connect the 24V AC power supply, and wire the spark electrode and flame sensor according to the wiring diagram. Ensure gas supply is off during installation.
What voltage does the ignition module require?
The module requires a 24V AC power supply (50/60 Hz). This is typically supplied from a step-down transformer or the appliance's control board.
How do I clean and maintain the ignition module?
Regularly clean the spark electrode and flame sensor with fine abrasive paper to remove carbon deposits. Check all wiring connections and ensure the module is free from moisture and dust. Perform maintenance at least once a year.
What safety features are included in the Noah NOAP3010MBDG?
The module includes flame failure lockout and spark retry with inter-purge. If ignition is not detected, the module will automatically shut off the gas valve and retry after a safe purge period, preventing gas accumulation.
Is the Noah NOAP3010MBDG compatible with both natural gas and propane?
Yes, the ignition module is compatible with natural gas and liquid propane systems. It does not regulate gas pressure, so it works with the appliance's existing gas valve and regulator.
How can I test the spark output of the ignition module?
To test the spark output, disconnect the spark lead and hold it about 1/8 inch from a ground metal surface while applying power. A strong, consistent blue spark should be visible. Use appropriate safety precautions and do not touch live wires.
What should I do if the ignition module fails to produce a spark?
First, check the power supply for correct 24V AC. Inspect the spark electrode and cable for cracks or wear. Verify the ground connection. If all are intact, the module may be faulty and should be replaced or serviced.
Are replacement parts available for this ignition module?
Yes, replacement parts such as spark electrodes, flame sensors, and gaskets are available. The module itself is field-serviceable, and a repair kit can be ordered from AFX or authorized distributors.
Does the Noah NOAP3010MBDG come with a warranty?
Yes, this ignition module is covered by a 1-year limited warranty against defects in materials and workmanship. The warranty does not cover misuse or improper installation.

User questions about Noah NOAP3010MBDG AFX

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Ignition in PDF format for free! Find your manual Noah NOAP3010MBDG - AFX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Noah NOAP3010MBDG by AFX.

USER MANUAL Noah NOAP3010MBDG AFX

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : AFX

Model : Noah NOAP3010MBDG

Category : Ignition