DI-704P - Router D-LINK - Free user manual and instructions
Find the device manual for free DI-704P D-LINK in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Broadband Router with 4-port switch and built-in print server |
| Brand | D-Link |
| Model | DI-704P |
| Category | Router |
| Dimensions | 190 x 117 x 31 mm |
| Weight | 320 g |
| Power Supply | 5V DC, 2.0A external adapter |
| Network Ports | 4 x 10/100 Mbps LAN, 1 x 10/100 Mbps WAN |
| Printer Port | 1 x Parallel (IEEE 1284) |
| Data Transfer Rate | 10/100 Mbps with auto-negotiation |
| Protocols | TCP/IP, NetBEUI, IPX/SPX |
| Firewall | NAT-based SPI firewall |
| VPN Support | PPTP, L2TP and IPsec pass-through |
| Security Encryption | WEP 64/128-bit |
| Management | Web-based configuration interface |
| LED Indicators | Power, WAN, LAN 1-4, Printer |
| Maintenance | Keep away from moisture, dust and direct sunlight; ensure adequate ventilation. |
| Cleaning | Use a dry soft cloth; never use liquid or spray cleaners. |
| Spare Parts | Power adapter and mounting screws available from manufacturer or authorized resellers. |
| Repairability | No user-serviceable parts inside; contact qualified service for repairs. |
| Operating Temperature | 0°C to 40°C |
| Operating Humidity | 10% to 85% non-condensing |
| Certifications | FCC Class B, CE |
Frequently Asked Questions - DI-704P D-LINK
How do I reset the D-Link DI-704P to factory defaults?
Locate the reset button on the back panel. With the router powered on, use a paperclip to press and hold the button for about 10 seconds until the Power LED begins to blink. Release the button; the router will restart and revert to factory settings, including the default IP address 192.168.0.1 and login credentials (admin/admin).
Can I connect a wireless access point to the DI-704P?
Yes, the DI-704P is a wired router, but you can connect a wireless access point to any of its LAN ports to provide Wi-Fi coverage. The router will assign IP addresses via DHCP to all devices, including those connected wirelessly through the access point.
How do I set up the router for a cable modem?
Connect the Ethernet cable from your cable modem to the WAN port on the DI-704P. Then, connect a computer to one of the LAN ports. Open a web browser and go to 192.168.0.1. Log in with admin/admin, then use the Wizard to select Cable Modem. Choose Dynamic IP if your ISP assigns an IP automatically, or enter the credentials if required. Save the settings and reboot.
How do I clean the DI-704P router?
To clean the router, first unplug it from the power source. Use a soft dry cloth to gently wipe the outer casing. Do not use liquid cleaners or abrasive materials, as they can damage the surface. Ensure all ventilation holes are free of dust for proper airflow and cooling.
What is the parallel printer port used for?
The DI-704P has a built-in print server with a parallel (IEEE 1284) port. You can connect a parallel printer to this port and share it across all computers on the network. The router uses TCP/IP to send print jobs to the printer, allowing easy sharing without a dedicated PC.
How do I update the firmware on the DI-704P?
Visit D-Link's official website and download the latest firmware file for the DI-704P. In the router's web interface, go to Tools and select Firmware Upgrade. Browse to the downloaded file and click Upgrade. Do not power off the device during the update process. Wait for the router to restart automatically.
How do I forward ports on the DI-704P?
To forward a port, log into the web interface and go to Advanced then Virtual Server. Enter the public port, the private IP address of the local computer, and the private port. Choose the protocol (TCP, UDP or both), set the rule to Enabled, and save the settings. Port forwarding is useful for hosting games or servers.
What is the default IP address and login password?
The default IP address is 192.168.0.1 and the default username is admin with an empty password field (or "admin" depending on the firmware version). For security, you should change the password as soon as you access the interface for the first time.
Does the DI-704P support VPN connectivity?
Yes, the DI-704P supports VPN pass-through for protocols such as PPTP, L2TP, and IPsec. This allows a VPN client on your LAN to establish a secure tunnel to an external VPN server. The router itself does not act as a VPN server, but it permits these connections to pass through its firewall.
How do I set up a static IP address assignment for a specific device on the DI-704P?
In the web interface, go to DHCP then Reservation. Enter the MAC address of the device and the IP address you want to reserve. Save the reservation and the router will always assign that IP address to the device. This is useful for server or printer sharing.
User questions about DI-704P D-LINK
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual DI-704P - D-LINK and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DI-704P by D-LINK.
USER MANUAL DI-704P D-LINK
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : D-LINK
Model : DI-704P
Category : Router