BT7167 - Audio/Video Accessories B-Tech - Free user manual and instructions
Find the device manual for free BT7167 B-Tech in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Wall mount for flat panel TVs |
| Compatible screen sizes | 32" to 70" TVs |
| VESA compatibility | 200x200, 300x300, 400x200, 400x400, 600x400 mm |
| Maximum weight capacity | 50 kg / 110 lbs |
| Material | High-grade steel with aluminum components |
| Surface finish | Powder-coated black |
| Mount type | Tiltable wall mount |
| Tilt adjustment | 0° to 15° downward tilt |
| Swivel adjustment | Fixed (no swivel) |
| Wall clearance | Approximately 25 mm from wall |
| Dimensions (W x H x D) | 530 x 350 x 25 mm |
| Net weight | 2.9 kg |
| Packaged weight | 3.6 kg |
| Power supply | None (passive mechanical device) |
| Installation method | Wall plate with fixings for solid and stud walls |
| Care and cleaning | Wipe using a soft dry cloth |
| Safety compliance | Designed for indoor use; must be installed on a load-bearing wall |
| Spare parts availability | Replacement screws and mount brackets available |
| Repairability | Contact manufacturer's support for repair options |
| Warranty | Standard 2-year manufacturer warranty |
Frequently Asked Questions - BT7167 B-Tech
How do I check if my TV is compatible with the BT7167 mount?
Check the VESA pattern on your TV manual or measure the distance between the mounting holes (horizontal x vertical). The BT7167 supports VESA sizes from 200x200 up to 600x400 mm, and screens from 32 to 70 inches.
What tools are required to install this wall mount?
You will need a drill, phillips screwdriver, spirit level, and a stud finder (for drywall). All necessary screws and spacers for common wall types are included in the package.
Can the mount be tilted after installation?
Yes, the BT7167 allows a downward tilt of 0 to 15 degrees, which helps reduce glare and improve viewing angle. Tilt tension is adjustable via a hex key.
How far will the TV sit from the wall?
When mounted, the back of the TV is approximately 25 mm from the wall, giving a slim, low-profile appearance while still leaving room for cable management.
Can I mount this on drywall or plasterboard?
Yes, the mount includes fixings for solid concrete, brick, and hollow drywall. For drywall, ensure you locate a strong backing or use suitable anchors, and never exceed the rated weight capacity.
Is the mount suitable for curved TV screens?
Yes, the standard VESA pattern on curved TVs will fit the BT7167. The flat mounting surface and adjustable tilt work fine with most curved display backs.
How do I clean the wall mount?
Use a soft, dry cloth to wipe dust and fingerprints. Do not use water, solvents, or abrasive cleaners as they may damage the powder-coated finish.
Can I adjust the horizontal level after mounting?
The BT7167 has slightly slotted holes on the wall plate that allow a small horizontal adjustment of ±3 degrees, making it easier to level the TV perfectly using a spirit level.
What is the maximum weight this mount can hold?
The maximum load capacity is 50 kg (110 lbs). Always verify your TV's weight before mounting and ensure the wall is strong enough to support the combined weight.
I'm missing some screws. What should I do?
The mount kit includes a variety of screws, washers, and spacers for different TV backs. If any are missing, contact B-Tech's spare parts service with the model number BT7167 to request replacements.
User questions about BT7167 B-Tech
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Audio/Video Accessories in PDF format for free! Find your manual BT7167 - B-Tech and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BT7167 by B-Tech.