ID0128 - Unknown LOGILINK - Free user manual and instructions
Find the device manual for free ID0128 LOGILINK in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | External hard drive adapter |
| Brand | LogiLink |
| Model | ID0128 |
| Interface | USB 2.0 |
| Supported drive interfaces | SATA I/II/III, IDE |
| Drive size support | 2.5" SATA, 3.5" SATA, 3.5" IDE |
| Data transfer rate | Up to 480 Mbps |
| Power supply | External AC adapter (included) |
| Plug and Play | Yes |
| Hot swap support | Yes |
| Operating system compatibility | Windows, macOS, Linux |
| Dimensions | Approx. 10 x 6 x 2 cm |
| Weight | Approx. 150 g |
| Package contents | Adapter unit, power adapter, USB cable, IDE cable, SATA cable |
| Main functions | Data transfer, drive cloning, backup |
| Maintenance | Wipe with a dry cloth |
| Safety | Avoid moisture and high temperatures |
| Repairability | No user-serviceable parts, contact support |
Frequently Asked Questions - ID0128 LOGILINK
What types of hard drives can I connect to the ID0128?
You can connect 2.5" SATA, 3.5" SATA, and 3.5" IDE drives. The adapter supports both SATA and IDE interfaces, making it versatile for legacy and modern drives.
Can I use the ID0128 with a USB 3.0 port?
Yes, the adapter is backward compatible. While it uses USB 2.0 technology (480 Mbps), it works when plugged into a USB 3.0 port at reduced speed.
Why do I need an external power adapter?
The external power adapter is required for 3.5" drives that need 12V power for spinning motors. 2.5" drives can be powered via the USB bus, but it's still recommended to use the adapter for stable operation.
Is the ID0128 compatible with macOS?
Yes, it is compatible with macOS and Linux. No additional drivers are needed for Windows 10/8.1/7, macOS 10.x, and most Linux distributions.
Can I boot my computer from a drive connected via this adapter?
Yes, provided your computer's BIOS/UEFI supports booting from a USB device. The adapter supports internal booting for SATA drives over USB.
What should I do if the drive is not detected?
First, check all connections and ensure the power switch is on. Try a different USB cable/port. Confirm the drive's jumper settings for IDE drives. If the issue persists, test the drive with another interface.
How do I safely remove the device?
On Windows, use the 'Safely Remove Hardware' icon. On macOS, drag the disk to the Trash. Ensure no data transfer is in progress before disconnecting.
Does the ID0128 support UASP?
No, this model uses USB 2.0 and does not support UASP (USB Attached SCSI Protocol). Newer adapters with USB 3.0 offer UASP for faster performance.
Can I use a SATA SSD with this adapter?
Yes, SATA SSDs in 2.5" format work. For 3.5" SATA SSDs, the power adapter is required. The adapter supports SATA I/II/III drives.
What kind of maintenance does the adapter require?
Keep the adapter and cables clean and dry. Use a dry cloth to wipe surfaces. Avoid dropping or exposing to extreme temperatures. There are no internal parts that need user servicing.
User questions about ID0128 LOGILINK
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Unknown in PDF format for free! Find your manual ID0128 - LOGILINK and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ID0128 by LOGILINK.
USER MANUAL ID0128 LOGILINK
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : LOGILINK
Model : ID0128
Category : Unknown