WNHA74SASEU - Tumble dryer GORENJE - Free user manual and instructions
Find the device manual for free WNHA74SASEU GORENJE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Heat pump tumble dryer |
| Brand | Gorenje |
| Model | WNHA74SASEU |
| Energy class | A++ |
| Drying capacity | 7 kg |
| Drum volume | 104 L |
| Number of programs | 16 |
| Main programs | Cotton, Eco, Synthetics, Delicates, Wool, Shirts, Sport, Mix, Refresh |
| Noise level | 65 dB |
| Dimensions (W x D x H) | 596 x 650 x 845 mm |
| Net weight | 40 kg |
| Power supply | 230 V, 50 Hz |
| Annual energy consumption | 236 kWh |
| Drying system | Heat pump |
| Display | LED display |
| Delay start | Yes, up to 24 hours |
| Reverse tumbling | Yes |
| Water tank | Yes, removable front tank |
| Filter cleaning | Automatic condenser cleaning |
| Anti-crease | Yes |
| Child lock | Yes |
| Spare parts availability | Genuine Gorenje spare parts can be ordered through service centers |
Frequently Asked Questions - WNHA74SASEU GORENJE
How do I clean the lint filter on the WNHA74SASEU?
Open the door and pull out the lint filter from the door slot. Remove the fluff by hand, then rinse the filter under cold water if needed. Dry it fully and slide it back into place. Keep the heat pump filter clean for efficient drying.
Why is my dryer taking too long to dry clothes?
The most common causes are a blocked lint filter, a full water tank, an overloaded drum, or a dirty condenser. Check each component and try a smaller load.
Can I open the door to add laundry after the cycle starts?
Yes. Press the Start/Pause button to pause the cycle, wait until the drum stops, then open the door. Add the laundry, close the door, and press Start/Pause again. The dryer will continue from where it left off.
Where is the water tank located on this Gorenje dryer?
The water tank is at the bottom of the dryer, behind the lower flap. Pull it out, empty the condensed water, and insert it back. Some models also allow direct drainage through a hose.
How do I reset the WNHA74SASEU tumble dryer?
Unplug the dryer and leave it disconnected for a few minutes. Plug it back in, choose a program, and press Start. This resets the electronic control unit and clears temporary errors.
What is the maximum load for this dryer?
The rated maximum drying capacity is 7 kg for cotton items. Reduce the load for delicates or synthetics. Always fill the drum loosely so air can circulate around the items.
How does the delay start feature work?
Use the Delay Start button to select a delay of up to 24 hours. Press it repeatedly to set the desired hour, then press Start. The cycle will finish at the selected time.
Is this a heat pump or condenser dryer?
It is a heat pump dryer. The built-in heat pump reuses hot air, so it consumes less electricity than traditional condenser dryers. It also uses a water tank, so no external vent is needed.
The door won't open after drying. What should I do?
Wait for the drum to cool and the door safety lock to disengage. If it remains locked, turn off the dryer, disconnect the power, and open the emergency door release located behind the lower filter flap.
Where can I download the manual and find spare parts?
The free user manual is available on Notice-Facile.com in PDF format. For spare parts such as the drum belt, door seal, or filters, contact an authorized Gorenje service center and quote the model number WNHA74SASEU.
User questions about WNHA74SASEU GORENJE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Tumble dryer in PDF format for free! Find your manual WNHA74SASEU - GORENJE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WNHA74SASEU by GORENJE.