61764 - Uncategorized WilTec - Free user manual and instructions
Find the device manual for free 61764 WilTec in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of Product | Submersible Water Pump |
| Brand | WilTec |
| Model | 61764 |
| Product Category | Uncategorized (Water Pump) |
| Power Supply | 220-240 V AC, 50 Hz |
| Power Consumption | 500 W |
| Max Flow Rate | 80 L/min |
| Max Delivery Head | 8 m |
| Max Immersion Depth | 7 m |
| Dimensions (L x W x H) | 22 x 18 x 28 cm |
| Weight | 3.8 kg |
| Hose Connection | 1 inch external thread |
| Protection Class | IPX8 |
| Power Cord Length | 10 m |
| Main Functions | Garden irrigation, cellar drainage, pool emptying, water transfer |
| Operation Mode | Automatic on/off with float switch |
| Maintenance | Rinse pump with clean water after each use; inspect seals and cable regularly |
| Cleaning | Remove debris from inlet filter; clean with soft brush |
| Safety Features | Thermal overload protection, run-dry protection |
| Safety Instructions | Use with residual current device; never run without water |
| Spare Parts & Repairability | Replacement impeller, seal kit and float switch available |
| Warranty | 2-year manufacturer warranty |
| Manual Language | English |
| Manual Pages | 4 |
Frequently Asked Questions - 61764 WilTec
What is the WilTec 61764?
The WilTec 61764 is a submersible clean water pump used for irrigation, water transfer and drainage.
What are the main technical specifications of the 61764?
It has a 500 W motor, a maximum flow rate of 80 L/min and a delivery head of 8 m. It operates on 220-240 V AC with an IPX8 waterproof rating.
How do I connect the pump?
Attach a garden hose to the pump outlet (1 inch thread) and secure it with a hose clamp. Immerse the pump fully and ensure the float switch is unobstructed.
How does the float switch work?
The float switch automatically turns the pump on when the water level rises and off when it falls, preventing run-dry and overflow.
Can I use the pump for dirty water?
No, the 61764 is designed for clean water only. Particles larger than 1 mm can damage the impeller.
How often should I clean the pump?
After every use, rinse it with fresh water. Check the inlet filter and remove leaves or debris. Deep cleaning is recommended every 3 months if used regularly.
What should I do if the pump does not start?
Check the power supply, the float switch position and the inlet filter. Make sure the pump is fully submerged in water. If the motor is warm, wait for it to cool and reset the thermal overload.
What safety precautions must be followed?
Always connect the pump to a residual current device (RCD/GFCI), never operate it without water, and unplug before cleaning or servicing.
Where can I buy spare parts for the 61764?
Spare parts such as impellers, seals and float switches are available from WilTec's official online store or authorized dealers.
How do I store the pump in winter?
Drain all water, clean and dry the pump, and store it in a frost-free room. Protect the power cord from damage.
User questions about 61764 WilTec
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual 61764 - WilTec and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 61764 by WilTec.
USER MANUAL 61764 WilTec
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : WilTec
Model : 61764
Category : Uncategorized