G293-Z23 - Server GIGABYTE - Free user manual and instructions
Find the device manual for free G293-Z23 GIGABYTE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Server |
| Brand | Gigabyte |
| Model | G293-Z23 |
| Form Factor | 2U Rack |
| Processor Support | Dual Socket AMD EPYC 7002/7003 Series |
| Memory | 16 x DIMM slots, DDR4, up to 512 GB |
| Storage | 12 x 3.5-inch hot-swap SATA/SAS bays |
| Expansion Slots | 4 x PCIe 4.0 x16 slots |
| Power Supply | 2 x 1200 W redundant PSUs |
| Cooling | 6 x hot-swappable cooling fans with smart speed control |
| Dimensions (W x D x H) | 438 mm x 730 mm x 88.9 mm |
| Weight | 25 kg (bare bone) |
| Operating Temperature | 10°C to 35°C |
| Management | ASpeed BMC with IPMI 2.0 and KVM over IP |
| Front Panel | USB 3.0 ports, VGA port, power button, status LEDs |
| Safety Features | Overcurrent, overvoltage, and thermal protection |
| Cleaning | Use dry compressed air; wipe exterior with a soft dry cloth |
| Spare Parts | Hot-swap fans, PSUs, and RAID controller battery |
| Repairability | Modular components for easy field replacement |
| General Information | Designed for data centers, AI, and high-performance computing workloads |
Frequently Asked Questions - G293-Z23 GIGABYTE
How can I download the G293-Z23 user manual?
Visit notice-facile.com and search for G293-Z23. Click the Download button to save the PDF manual directly to your device.
What are the rack installation requirements for the G293-Z23?
The server uses a standard 2U rack with at least 730 mm of depth for proper clearance. Ensure the rack is secured to the floor and that front and rear airflow paths are unobstructed.
How do I install CPUs and memory modules?
First, disengage the CPU socket levers and align the CPU with the marked corner. Insert the CPU smoothly, close the cover, and lower the levers. For memory, unlock the DIMM slots and push the module firmly until clips snap. Use only DDR4 ECC RDIMMs from the approved vendor list.
How to configure RAID on the G293-Z23?
Boot into the RAID BIOS by pressing the specified key during POST. Use the controller utility to create logical drives. Alternatively, configure virtual disks from your operating system using the controller's management software.
How do I update the BIOS or BMC firmware?
Download the latest firmware from the Gigabyte support page. Use the BMC web interface to upload the binary file, or create a USB bootable media with the BIOS updater tool. Follow the on-screen instructions carefully.
What should I do if the server does not power on?
Check the power cables and ensure both PSUs are connected to working outlets. Verify the power button and front panel header. Inspect the PSU LEDs; if they are off, replace the failed PSU with a spare.
How should I clean the G293-Z23 server?
Power off the server and disconnect all cables. Use compressed air to blow dust from the fans and heatsinks. Wipe the exterior with a dry, lint-free cloth. Avoid using liquids, vacuum cleaners, or damp cloths.
How do I replace a faulty cooling fan?
Listen for an alarm or check the BMC dashboard for a failed fan. Identify the yellow/red LED on the fan assembly. Release the clip, pull out the fan module, and slide in a new one. It will click into place and power on automatically.
What safety precautions should I take when servicing the server?
Always use an anti-static wrist strap and work on a grounded mat. Never access internal components with the power on. Wait at least two minutes after disconnecting power to allow capacitors to discharge. Handle drives by the edges to prevent damage.
Where can I find spare parts for the G293-Z23?
Contact your Gigabyte authorized reseller or visit the official Gigabyte website. Common replacements like fans, power supplies, and cables can also be sourced from certified distribution partners.
User questions about G293-Z23 GIGABYTE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual G293-Z23 - GIGABYTE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. G293-Z23 by GIGABYTE.
USER MANUAL G293-Z23 GIGABYTE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : GIGABYTE
Model : G293-Z23
Category : Server