MBF06ZB - Water heater Mirage - Free user manual and instructions
Find the device manual for free MBF06ZB Mirage in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Electric storage water heater |
| Brand | Mirage |
| Model | MBF06ZB |
| Capacity | 6 liters |
| Mounting type | Wall-mounted, under-sink |
| Power rating | 1500 W |
| Voltage / frequency | 220-240 V ~ 50 Hz |
| Temperature range | 30-60 °C |
| Rated pressure | 0.6 MPa (6 bar) |
| Water connections | 1/2" BSP inlet/outlet |
| Dimensions (H × W × D) | 290 × 245 × 245 mm |
| Weight (empty) | 3.4 kg |
| Tank material | Steel with enamel coating |
| Insulation | Polyurethane foam |
| Heating time | Approx. 20 minutes to 60 °C |
| Thermostat | Adjustable with overheat protection |
| Safety valve | Pressure relief valve included |
| Water protection | IPX4 splash-proof |
| Maintenance | Regular descaling recommended |
| Spare parts availability | Replaceable heating element, thermostat, valves |
| Warranty | 2 years limited warranty |
Frequently Asked Questions - MBF06ZB Mirage
How do I install the Mirage MBF06ZB water heater?
Mount the unit securely on a wall near the water supply, connect the inlet and outlet pipes (1/2" BSP), and ensure the pressure relief valve is fitted correctly. Connect to 220-240 V power, then fill the tank before switching on.
What is the recommended maintenance schedule?
Perform descaling every 6 to 12 months depending on water hardness. Also inspect the pressure relief valve regularly and replace worn gaskets or seals to ensure safe operation.
Can I use the water heater with a shower?
The MBF06ZB is a 6-liter storage heater designed for sink use or small point-of-use applications. It is not intended for shower use, as the limited volume will not provide a continuous shower flow.
How do I adjust the temperature?
Turn the thermostat dial on the front of the unit to select your desired temperature. The range is 30-60 °C. Use a middle setting for balanced comfort and energy savings.
What does the pressure relief valve do?
The pressure relief valve automatically releases excess pressure inside the tank, preventing dangerous overpressure. It may discharge a small amount of water during heating, which is normal.
How long does it take to heat up?
With a 1500 W heating element, the water reaches 60 °C in approximately 20 minutes. Actual time varies with inlet water temperature.
Is the water heater energy efficient?
Yes, the tank has thick polyurethane insulation to minimize heat loss. Use the thermostat to avoid overheating, and turn the unit off if not needed for long periods to save energy.
What should I do if water leaks from the device?
First, switch off the power and close the water inlet. The leak is likely from a loose connection, a damaged gasket, or the pressure relief valve. Check and tighten or replace parts as needed. If the tank itself is leaking, contact a professional.
Can I install the heater myself or need a professional?
If you have basic plumbing and electrical skills, you can install it yourself, but we recommend a qualified professional to ensure compliance with local regulations and safe electrical connections.
What spare parts are commonly replaced?
The most common replaceable parts include the thermostat, heating element, pressure relief valve, and inlet/outlet seals. Mirage offers genuine spare parts for long-term reparability.
User questions about MBF06ZB Mirage
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water heater in PDF format for free! Find your manual MBF06ZB - Mirage and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MBF06ZB by Mirage.
USER MANUAL MBF06ZB Mirage
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Mirage
Model : MBF06ZB
Category : Water heater