BBE13B - Water dispenser Britania - Free user manual and instructions
Find the device manual for free BBE13B Britania in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Water dispenser |
| Brand | Britania |
| Model | BBE13B |
| Dimensions (W x D x H) | 28 x 28 x 83 cm |
| Weight | 5.5 kg |
| Rated voltage | 220-240 V, 50 Hz |
| Heating power | 500 W |
| Cooling power | 75 W |
| Hot water temperature | 85-95 °C (constant) |
| Cold water temperature | 10-15 °C |
| Water tank capacity | 2.2 liters |
| Bottle type | Standard 3-gallon or 5-gallon bottle |
| Drip tray | Removable and washable |
| Controls | Push-tap levers for hot and cold water |
| Indicators | LED power and heating/cooling status lights |
| Safety features | Child safety lock on hot tap, overheating protection |
| Material | ABS plastic body, stainless steel reservoir |
| Cleaning | Wipe exterior with damp cloth; descale internal tank periodically |
| Maintenance | Clean drip tray and nozzles weekly |
| Repairability | Removable back panel for access to internal parts |
| Accessories included | User manual, drip tray assembly |
Frequently Asked Questions - BBE13B Britania
How do I install the bottle on the Britania BBE13B water dispenser?
Remove the bottle cap, lift the small cap on top of the dispenser, and insert the bottle neck into the probe. Make sure it sits firmly, then allow water to fill the internal tank.
Why does the hot water temperature appear lower than expected?
The hot water is held at a constant 85-95 °C to prevent scalding. If you need boiling water, allow the unit to heat for a few minutes after refilling the tank.
How often should I clean the water dispenser?
It is recommended to clean the drip tray and faucet nozzles at least once a week. Descale the internal reservoir every 1-2 months using a mild citric acid solution.
Can I use a 5-gallon bottle with this model?
Yes, the BBE13B is compatible with standard 3-gallon and 5-gallon bottles commonly used in households.
What is the best way to descale the water tank?
Turn off and unplug the dispenser, remove the bottle, and drain all water. Mix a solution of citric acid or vinegar with water, pour it into the tank, wait 20-30 minutes, then rinse thoroughly with clean water before reuse.
Why is there no cold water coming out?
Check if the cooling switch is turned on and the green indicator is lit. If not, press the switch. Also ensure the internal tank has enough water and the bottle is not empty.
What should I do if the hot water tap drips?
Clean the faucet seat and replace the small rubber gasket if worn. Usually, a simple valve tightening or gasket replacement resolves the dripping issue.
Is it safe to leave the dispenser on overnight?
Yes, the unit has an automatic thermal cutoff for heating and a reliable cooling system. Ensure the child safety lock is engaged to prevent accidental hot water discharge.
How long does it take for the water to heat or cool?
Heating typically takes about 10 minutes to reach 85-95 °C, while cooling can take up to 2 hours to reach 10-15 °C, depending on the ambient temperature and initial water temperature.
Can I operate the dispenser without a bottle?
Yes, you can fill the internal tank directly with filtered or bottled water, but avoid exceeding the maximum fill level indicated inside the tank.
User questions about BBE13B Britania
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water dispenser in PDF format for free! Find your manual BBE13B - Britania and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BBE13B by Britania.
USER MANUAL BBE13B Britania
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Britania
Model : BBE13B
Category : Water dispenser