BAF-10900BT - Loudspeaker Steren - Free user manual and instructions
Find the device manual for free BAF-10900BT Steren in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Bluetooth Speaker |
| Brand | Steren |
| Model | BAF-10900BT |
| Connectivity | Bluetooth 4.2 |
| Power Source | Built-in rechargeable lithium-ion battery |
| Battery Capacity | 1200 mAh |
| Charging Port | Micro USB |
| Playback Time | Up to 6 hours |
| Charging Time | Approximately 2 hours |
| Output Power | 5 W RMS |
| Frequency Response | 100 Hz – 20 kHz |
| Signal-to-Noise Ratio | ≥ 80 dB |
| Dimensions | 20.0 × 7.0 × 7.0 cm |
| Weight | 500 g |
| Controls | Power, volume up/down, play/pause, answer/end call |
| Built-in Microphone | Yes, for hands-free calling |
| Compatibility | Smartphones, tablets, laptops |
| Maintenance | Wipe with a soft, dry cloth; avoid moisture |
| Repairability | Battery and charging port can be replaced at an authorized service center |
| Safety Warnings | Do not expose to water or high temperatures; use only supplied charger |
Frequently Asked Questions - BAF-10900BT Steren
How do I pair my Steren BAF-10900BT with a smartphone?
Turn on the speaker by pressing and holding the power button until the indicator blinks. Activate Bluetooth on your phone, search for BAF-10900BT, and select it. If prompted, enter the default PIN 0000. The pairing is complete when the indicator turns solid.
How long does the battery last on a full charge?
The built-in lithium-ion battery provides up to 6 hours of continuous playback at moderate volume. Actual battery life may vary depending on volume level and audio content.
Can I use the speaker while charging?
Yes, the speaker supports pass-through charging, so you can use it while connected to a power source. However, for optimal battery health, it is recommended to fully charge before first use.
How do I charge the speaker?
Connect the Micro USB cable to the charging port and plug the other end into a USB power adapter or computer. The indicator will light up during charging and turn off when fully charged, typically after 2 hours.
The speaker is not turning on. What should I do?
First, ensure the battery is charged by connecting it to power for at least 30 minutes. Try pressing and holding the power button for 5 seconds. If it still does not respond, check the charging cable and outlet. If the issue persists, the battery may be depleted and need service.
How do I reset the speaker to factory settings?
To reset, turn off the speaker, then press and hold the power button and the volume up button simultaneously for 10 seconds. This will clear the pairing memory and restore default settings.
Can I connect two speakers for stereo sound?
The BAF-10900BT does not support TWS (True Wireless Stereo) pairing. To achieve stereo sound, you would need to use an external amplifier and wired connection if available.
What is the range of the Bluetooth connection?
The effective range is up to 10 meters (33 feet) in open space. Walls and obstacles may reduce the range or cause audio interruptions.
How do I clean and maintain the speaker?
Use a soft, dry cloth to wipe the exterior. Do not use abrasive cleaners or solvents. Ensure the charging port is free of dust and moisture. Store the speaker in a cool, dry place when not in use.
Is the speaker waterproof?
No, the Steren BAF-10900BT is not waterproof. It is intended for indoor use. Keep it away from water, rain, and high humidity to avoid damage.
User questions about BAF-10900BT Steren
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual BAF-10900BT - Steren and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BAF-10900BT by Steren.