WHM1002 - Water heater VOX - Free user manual and instructions
Find the device manual for free WHM1002 VOX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Electric water heater |
| Brand | VOX |
| Model | WHM1002 |
| Tank capacity | 10 litres |
| Rated power | 2000 W |
| Voltage | 220-240 V AC, 50 Hz |
| Temperature range | 35 °C to 75 °C |
| Heating time | Approx. 20 min to reach 65 °C |
| Tank material | Stainless steel |
| Exterior body | White painted steel |
| Mounting type | Wall-mounted |
| Water connections | G1/2 BSP inlet and outlet |
| Safety valve | Pressure relief valve included |
| Thermostat | Adjustable with overheat protection |
| Control | Rotary temperature selector |
| Indicator light | Power and heating status LED |
| Safety features | Thermal cutoff and IPX4 splash-proof protection |
| Recommended maintenance | Descale every 3-6 months depending on water hardness |
| Cleaning | Wipe exterior with a soft damp cloth; do not use abrasives |
| Spare parts availability | Heating element, thermostat, safety valve and anode available |
| Repairability | Removable cover gives access to the heating element and thermostat |
| Certification | CE marked |
| Dimensions | Approx. 360 x 360 x 410 mm |
| Weight | Approx. 5.5 kg |
Frequently Asked Questions - WHM1002 VOX
How do I install the VOX WHM1002 water heater?
Installation must be done by a qualified plumber. Mount the unit on a solid wall, connect the G1/2 water connections, fill the tank completely, then switch on the power.
What is the tank capacity of the WHM1002?
The WHM1002 has a 10 litre storage tank, suitable for under-sink or point-of-use hot water.
How long does it take to heat the water?
With a 2000 W heating element, the water reaches about 65 °C in approximately 20 minutes, depending on the inlet water temperature.
Can I install the water heater inside a bathroom?
The unit has IPX4 splash-proof protection, so it can be installed in a bathroom, but keep it away from direct shower spray and ensure the electrical supply is protected.
What should I do if the overheat protection switches the heater off?
Disconnect the power supply and allow the heater to cool down. Once cooled, reconnect and restart. If the protection trips again, call a qualified technician to inspect the thermostat and heating element.
How do I maintain the WHM1002?
Descale the tank periodically, especially in hard water areas. Check the pressure relief valve every month and operate it to make sure it is not blocked.
Are spare parts available for this water heater?
Yes, the heating element, thermostat, safety valve and anode are serviceable parts and can be replaced by a qualified technician.
Why is the pressure relief valve dripping?
Slight dripping during heating is normal. If it drips continuously, check the water pressure and have the valve replaced if it is worn or blocked.
What water pressure range is recommended?
The recommended water pressure is between 0.2 and 0.8 MPa. If the supply pressure is higher, install a pressure reducer.
Can I use the heater before filling it with water?
No, always fill the tank with water first. Running the WHM1002 dry can damage the heating element and void the warranty.
User questions about WHM1002 VOX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water heater in PDF format for free! Find your manual WHM1002 - VOX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WHM1002 by VOX.
USER MANUAL WHM1002 VOX
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : VOX
Model : WHM1002
Category : Water heater