ISC735CSC - Switch Black Box - Free user manual and instructions
Find the device manual for free ISC735CSC Black Box in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Industrial Ethernet Switch |
| Brand | Black Box |
| Model | ISC735CSC |
| Number of Ports | 8 Gigabit Ethernet ports |
| Port Type | 10/100/1000BASE-T (RJ45) |
| Data Transfer Rate | Up to 1000 Mbps |
| Switching Capacity | 16 Gbps (non-blocking) |
| Power Input | 12 to 36 V DC |
| Power Consumption | 4 W typical |
| LED Indicators | Power, Link/Activity per port |
| Management | Managed Layer 2 switch |
| Key Functions | VLAN, QoS, IGMP snooping, port mirroring |
| Mounting | DIN rail and wall mount |
| Operating Temperature | -40°C to 75°C |
| Enclosure | Rugged industrial metal housing |
| Cooling | Fanless design |
| Maintenance | Keep the device clean and dry; no special maintenance required |
| Safety | Use only approved power supplies; avoid exposing to extreme conditions |
| Spare Parts / Repairability | No user-serviceable parts; contact Black Box support |
| Manual | Free PDF manual available for download (46 pages) |
Frequently Asked Questions - ISC735CSC Black Box
How do I install the ISC735CSC switch?
Connect your Ethernet cables to the RJ45 ports and plug the power supply into a suitable DC source. Mount the switch on a DIN rail or a flat wall surface using the provided brackets. The device is ready to use immediately in unmanaged mode; for advanced settings, access the web interface.
Does this switch support Power over Ethernet (PoE)?
No, the ISC735CSC is a non-PoE switch. It provides data connectivity only. If you need PoE for IP cameras or phones, consider Black Box's PoE models.
What is the default IP address for the web management interface?
The default IP address is typically 192.168.0.1. Reset the switch to factory defaults to restore this IP. You can change it in the network settings.
How do I reset the switch to factory defaults?
Locate the reset button on the front panel. Press and hold it for 10 seconds while the device is powered on. The switch will reboot with default settings, including the default IP address and password.
What is the maximum cable length supported?
For standard Ethernet, the maximum distance over Cat5e/Cat6 cable is 100 meters (328 feet). This switch complies with IEEE 802.3 specifications.
Can I mount the switch on a DIN rail?
Yes, the ISC735CSC comes with a DIN rail clip pre-installed. You can also use the external mounting brackets for wall installation.
How do I update the firmware?
Download the latest firmware from the Black Box website, then upload it via the web management interface under System > Firmware Upgrade. Do not power off during the upgrade process.
Does the switch support VLANs?
Yes, it supports 802.1Q VLANs. You can configure up to 256 VLAN groups to isolate network traffic and improve security.
What do the LEDs indicate?
The power LED shows the device status; each port has a Link/Activity LED that lights when a connection is established and blinks during data transmission.
Is the switch silent?
Yes, it has a fanless design, making it completely silent and ideal for noise-sensitive areas like offices or residential environments.
User questions about ISC735CSC Black Box
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual ISC735CSC - Black Box and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ISC735CSC by Black Box.
USER MANUAL ISC735CSC Black Box
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Black Box
Model : ISC735CSC
Category : Switch