Elgin

Flash - Uncategorized Elgin - Free user manual and instructions

Find the device manual for free Flash Elgin in PDF.

📄 44 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Elgin Flash - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Electronic flash unit
Brand Elgin
Model Flash
Guide Number 30 (ISO 100, meters)
Flash Modes Manual, Automatic
Recycling Time 0.5 - 5 seconds
Number of Flashes 200 - 300 per battery set
Flash Duration 1/1000 sec at full power
Color Temperature 5500 K
Coverage Angle 75° x 55° (for 35mm lens)
Bounce Head Yes, 90° vertical, 270° horizontal
Power Source 4 x AA batteries or external 6V DC
Dimensions 80 x 120 x 100 mm (approx.)
Weight 320 g (without batteries)
Mount Standard hot shoe with sync cord
Flash Tube User replaceable
Auto Power Off Yes, after 30 min idle
Exposure Control Built-in photocell
Ready Indicator Neon lamp
Included Accessories Sync cord, manual
Cleaning Wipe with dry cloth; avoid solvents
Safety High voltage inside; do not open
Spare Parts and Repairability Flash tube and sync cord replaceable

Frequently Asked Questions - Flash Elgin

How do I install batteries in my Elgin Flash?
Open the battery compartment on the side of the flash. Insert four AA batteries following the polarity marks (+ and -) inside the compartment. Use fresh alkaline batteries for optimal performance and fast recycling.
What is the Guide Number and how do I calculate the correct aperture?
The Guide Number (GN) is 30 at ISO 100 in meters. To find the correct aperture, divide the GN by the flash-to-subject distance: aperture = GN / distance. For example, at 3 meters, use f/10.
How do I use the automatic mode on the flash?
Set your film speed (ISO) on the flash's control panel and switch to Auto mode. The built-in photocell measures the light reflected from the subject and controls the flash duration. Set your camera to the aperture indicated by the flash's guide for correct exposure.
Can I use this flash with a modern digital camera?
The flash's sync voltage may be higher than what modern digital cameras can handle. Check your camera's maximum sync voltage. If it's incompatible, use a sync voltage adapter to protect the camera's circuitry.
How do I clean the flash contacts?
Use a dry, lint-free cloth to wipe the metal contacts on the flash foot and sync cord. For stubborn dirt, lightly moisten a cotton swab with isopropyl alcohol. Never use abrasive cleaners as they can damage the coating.
How can I shorten the recycling time?
Recycling time depends on battery condition and power setting. Use fresh, high-quality alkaline or NiMH batteries. Lowering the flash power (e.g., in manual mode) also reduces recycling time. An external 6V DC power pack speeds up recycling further.
Is the flash tube replaceable?
Yes, the flash tube is user replaceable after removing the front cover. Contact Elgin or an authorized service center for a compatible replacement. Always disconnect power before replacing.
What should I do if the flash does not fire?
First, check that the batteries are fresh and inserted correctly. Ensure the flash is fully charged (ready lamp lit). Check the sync cable connection and camera's shutter speed (set to 1/125 sec or slower). If still not firing, the flash tube or capacitor may need servicing.
Can I use the Elgin Flash for bounce photography?
Yes, the flash head swivels 90° vertically and 270° horizontally. Place the head at an angle to bounce light off a ceiling or wall. In Auto mode, the sensor remains pointed at the subject for accurate exposure.
How do I dispose of the flash at the end of its life?
The flash contains electronic components and possibly a capacitor with high voltage. Do not open it. Dispose of it as electronic waste according to local regulations. Remove batteries and recycle them separately.

User questions about Flash Elgin

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Uncategorized in PDF format for free! Find your manual Flash - Elgin and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Flash by Elgin.

USER MANUAL Flash Elgin

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Elgin

Model : Flash

Category : Uncategorized