SP6PTW - Loudspeaker Speco Technologies - Free user manual and instructions
Find the device manual for free SP6PTW Speco Technologies in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 2-way indoor/outdoor pendant loudspeaker |
| Brand | Speco Technologies |
| Model | SP6PTW |
| Speaker Configuration | 2-way with woofer and tweeter |
| Woofer Size | 6.5-inch (165 mm) polypropylene cone |
| Tweeter Size | 1-inch (25 mm) dome tweeter |
| Frequency Response | 70 Hz - 20 kHz |
| Impedance | 8 ohms (bypass transformer) |
| Sensitivity | 90 dB (1W/1m) |
| Power Handling (RMS) | 60 watts RMS, 120 watts peak |
| Transformer Taps | 70V: 15W / 7.5W / 3.75W; 25V: 3.8W / 1.9W / 0.9W |
| Color | White |
| Mounting Type | Pendant with adjustable hanging cable, also suitable for wall mounting |
| IP Rating | IP45 weather-rated for use in covered outdoor areas |
| Housing Material | Engineered ABS plastic with UV inhibitors |
| Grille Material | Powder-coated steel, corrosion-resistant |
| Connectors | 5-way binding posts with screw terminals |
| Dimensions | Diameter 9.6 inches (244 mm), height 8.7 inches (221 mm) |
| Weight | 4.2 lbs (1.9 kg) |
| Operating Temperature | -25°C to 65°C (-13°F to 149°F) |
| Recommended Amplifier Power | 20 to 80 watts RMS per 8-ohm or transformer tap |
| Dispersion | 120 degrees conical coverage |
| Included Accessories | Hanging cable, mounting bracket, rubber stop ring, manual |
| Cleaning Instructions | Wipe with a soft dry cloth; do not use water or solvents on the driver |
| Warranty | 1-year limited warranty |
Frequently Asked Questions - SP6PTW Speco Technologies
How do I set the wattage tap on the SP6PTW for 70V systems?
Locate the transformer tap switch on the speaker's rear panel. Use a small screwdriver to rotate the switch to the desired watts, typically 15W, 7.5W, or 3.75W. Match the tap to your amplifier's output wattage for that speaker line.
Can the SP6PTW be installed outdoors?
Yes, the SP6PTW has an IP45 rating, meaning it is protected against water jets and is suitable for covered outdoor areas, such as patios or gazebos. Do not expose it to direct rain or prolonged submersion.
What is the recommended amplifier power for this speaker?
For best performance, use an amplifier that delivers 20 to 80 watts RMS per channel. If using the 70V transformer, set the amplifier's constant-voltage output to match the selected tap.
How should I clean the SP6PTW loudspeaker?
Use a soft, dry cloth to gently wipe the exterior and grille. Do not use water, cleaning sprays, or solvents, as they may damage the driver components or housing.
What is the difference between the 8-ohm and 70V connections?
In 8-ohm mode, the speaker is connected directly to a conventional amplifier. In 70V mode, the built-in transformer allows multiple speakers to be connected in parallel to a high-voltage constant-voltage amplifier, which is typical for commercial paging systems.
What is included in the box with the SP6PTW?
The package includes the speaker, a hanging cable for pendant mounting, a mounting bracket, a rubber stop ring for ceiling mounts, and a user manual with wiring guides.
How do I mount the speaker as a pendant?
Attach the hanging cable to the speaker's eyelet, then connect the other end to a sturdy ceiling anchor. Adjust the cable length to the desired height, and secure it using the locking screws. Ensure the speaker is parallel to the floor for even sound dispersion.
Is the grille removable?
Yes, the front grille is removable for access to the woofer and tweeter. Gently pull the grille off from the edges, or use a flat-head screwdriver if it is retained by screws. Reinstall it by pressing firmly until it snaps into place.
Can I use the SP6PTW for both music and paging?
Absolutely. With a frequency response of 70 Hz - 20 kHz, it reproduces both voice and music clearly. For paging, it covers 70V systems efficiently; for music, it offers a wide range and high sensitivity.
What should I do if the speaker has no output?
First, verify the transformer tap and amplifier settings are correct. Check the speaker wiring connections for loose or shorted wires. If using a 70V system, ensure the voltage selector matches. If the problem persists, test the speaker with a known-good amplifier to isolate the issue.
User questions about SP6PTW Speco Technologies
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual SP6PTW - Speco Technologies and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SP6PTW by Speco Technologies.
USER MANUAL SP6PTW Speco Technologies
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Speco Technologies
Model : SP6PTW
Category : Loudspeaker