PRO 500 - Office chair N. Seat - Free user manual and instructions
Find the device manual for free PRO 500 N. Seat in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Office chair |
| Brand | N. Seat |
| Model | PRO 500 |
| Category | Seating furniture |
| Chair Height Range | Approx. 88–98 cm (seat top to top of backrest) |
| Seat Dimensions | Approx. 50 x 50 cm (width x depth) |
| Seat Height Adjustment | Yes, gas lift; range approx. 40–50 cm from floor |
| Backrest | Mid-back, ergonomic curve |
| Backrest Angle | Adjustable tilt with tension control |
| Armrests | 2D adjustable (up/down, left/right) |
| Lumbar Support | Adjustable lumbar cushion |
| Frame Material | Reinforced nylon |
| Upholstery | Breathable mesh fabric |
| Padding | High-density foam |
| Weight Capacity | Up to 120 kg |
| Base | 5-star base with casters |
| Casters | Swivel casters for hard or carpeted floors |
| Assembly | Required; tools and instructions included |
| Cleaning | Wipe with a damp cloth; do not use solvents |
| Safety Standard | Tested in accordance with BIFMA requirements |
| Warranty | 2 years on mechanism, 1 year on upholstery |
Frequently Asked Questions - PRO 500 N. Seat
How do I adjust the seat height?
To adjust the seat height, sit on the chair and use the gas lift lever located beneath the seat. Lift the lever while slightly raising your body, then release it once the desired height is reached. The height range is approximately 40–50 cm from the floor.
What is the maximum weight capacity of the PRO 500?
The PRO 500 is designed to support up to 120 kg. Exceeding this limit may damage the frame or gas lift and compromise safety.
Can I adjust the armrests?
Yes, the armrests are 2D adjustable. You can raise or lower them using the button on the side, and you can also slide them left or right to fit your shoulders and arms.
Are the casters replaceable?
Absolutely. The casters use a standard 11 mm stem. You can pull the old casters out from the base and push new ones in. Choose casters suitable for your floor type.
How should I clean the mesh backrest?
Use a soft brush attachment on your vacuum to remove dust and debris. For stains, wipe the mesh with a damp cloth and mild soap, then let it air dry. Avoid harsh chemicals.
Is the chair suitable for long hours of sitting?
Yes, the PRO 500 features an ergonomic backrest with adjustable lumbar support and a breathable mesh seat. This promotes proper posture and reduces strain during extended use.
How does the tilt tension control work?
The tilt tension knob is located under the seat. Turn it clockwise to increase the tension (stiffer backrest) or counter-clockwise to loosen it. This lets you adjust the rocking resistance while adjusting the backrest angle.
What tools are included for assembly?
A hex key (Allen wrench) and a wrench are included in the package. All necessary bolts and screws are pre-bagged and labeled for easy assembly.
Does the chair come with a warranty?
Yes, it includes a 2-year warranty on the gas lift, tilt mechanism, and base, and a 1-year warranty on the upholstery and casters. Contact N. Seat support for any issues.
What should I do if the chair starts making noise?
Most squeaks come from moving parts. Apply a small amount of silicone lubricant to the gas lift, tilt mechanism, and caster stems. Also, check that all bolts are tightened.
User questions about PRO 500 N. Seat
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Office chair in PDF format for free! Find your manual PRO 500 - N. Seat and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PRO 500 by N. Seat.
USER MANUAL PRO 500 N. Seat
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : N. Seat
Model : PRO 500
Category : Office chair