KLT90XS - Range hood SMEG - Free user manual and instructions
Find the device manual for free KLT90XS SMEG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wall-mounted chimney range hood |
| Brand | Smeg |
| Model | KLT90XS |
| Mounting Type | Wall-mounted |
| Width | 90 cm |
| Height | 65 - 110 cm (telescopic chimney) |
| Depth | 50 cm |
| Weight | 16 kg (approx.) |
| Finish | Stainless steel brushed |
| Number of Motors | 1 |
| Motor Power | 260 W |
| Max Airflow | 800 m³/h |
| Number of Speeds | 4 (including intensive speed) |
| Noise Level | 53 - 70 dB |
| Lighting | LED, 2 x 3 W |
| Controls | Touch panel with display and remote control |
| Grease Filter | 3 washable aluminium filters |
| Charcoal Filter | Optional for recirculation mode |
| Energy Efficiency Class | B |
| Air Extraction | Ducted or recirculation |
| Special Features | Delayed shut-off, filter saturation alarm, boost function |
| Maintenance | Wash grease filters regularly; replace charcoal filters every 3-4 months |
| Safety Features | Overheat protection and automatic shut-off |
| Repairability | Spare parts available: filters, motor, LED modules, control board |
Frequently Asked Questions - KLT90XS SMEG
How to install the Smeg KLT90XS range hood?
Installation must be done by a qualified technician. The hood should be mounted at least 65 cm above an electric hob and 75 cm above a gas hob. Use the provided fixing brackets and ensure the wall can support the weight.
How often should I clean the grease filters?
Clean the aluminium grease filters every 4-6 weeks depending on usage. They can be washed in a dishwasher or by hand with hot soapy water. Always dry before reinstalling.
How to replace the charcoal filter?
When using recirculation mode, replace the charcoal filter every 3-4 months. Remove the grease filters first, then insert the charcoal filter into the motor frame. Follow the instructions in the manual.
Can the KLT90XS be used in recirculation mode?
Yes, it can be used without ducting by installing an optional charcoal filter. This is ideal for homes without external vent access.
How to pair the remote control?
Insert a 12V battery (type A27) into the remote. Press the hood's on/off button and within 5 seconds press the matching button on the remote. The display will indicate pairing is complete.
What are the dimensions of the hood?
The hood is 90 cm wide, 50 cm deep, and the telescopic chimney extends from 65 cm to 110 cm in height. Weight is approximately 16 kg.
Is the LED lighting replaceable?
Yes, the LED modules can be replaced. They are available as spare parts. Ensure the hood is disconnected from power before removing the lamp holder.
What to do if the hood is noisy?
Check that the ducting is free from blockages and that the filters are clean. Also ensure the hood is securely mounted. Excessive noise may indicate motor issues; contact service.
How to reset the filter saturation alarm?
After cleaning or replacing filters, press and hold the light button for 5 seconds until the display resets. The alarm is a visual reminder based on hours of operation.
Does the hood have a boost function?
Yes, the KLT90XS features an intensive speed (boost) that increases airflow to 800 m³/h for rapid odor removal. It runs for 10 minutes then returns to the previous speed.
User questions about KLT90XS SMEG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual KLT90XS - SMEG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KLT90XS by SMEG.
USER MANUAL KLT90XS SMEG
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SMEG
Model : KLT90XS
Category : Range hood