BP-110 - Camera battery Watson - Free user manual and instructions
Find the device manual for free BP-110 Watson in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Camera battery |
| Brand | Watson |
| Model | BP-110 |
| Battery Chemistry | Lithium-ion (Li-ion) |
| Nominal Voltage | 7.4 V |
| Capacity | 2200 mAh |
| Energy | 16.28 Wh |
| Dimensions (W x H x D) | 35 x 45 x 30 mm |
| Weight | 60 g |
| Compatible Camcorders | Canon Vixia HF series, Legria HF series and other devices using BP-110 battery |
| Charge Cycles | Up to 500 cycles |
| Operating Temperature | 0°C to 45°C / 32°F to 113°F |
| Charge Temperature | 10°C to 35°C / 50°F to 95°F |
| Charging Time | Approximately 2 hours with a compatible charger |
| Self-Discharge Rate | Approximately 5% per month when stored at room temperature |
| Protection Features | Overcharge, over-discharge, and short-circuit protection |
| Maintenance | Keep contacts clean and dry; wipe with a soft cloth if needed |
| Storage Recommendations | Store in a cool, dry place; avoid extreme temperatures |
| Safety Precautions | Do not disassemble, crush, or expose to heat above 60°C (140°F) |
| Repairability | Non-repairable; dispose of properly at a recycling facility |
| Warranty | 2-year limited warranty from Watson |
| Package Contents | 1 x BP-110 battery, instruction sheet |
Frequently Asked Questions - BP-110 Watson
What devices is the Watson BP-110 battery compatible with?
The Watson BP-110 is designed to replace the Canon BP-110 battery pack. It is compatible with Canon camcorders such as the Vixia HF series and Legria HF series, as well as other devices that use the same model number.
What is the capacity and voltage of the BP-110 battery?
The battery has a capacity of 2200 mAh and a nominal voltage of 7.4 V, providing reliable power for extended recording sessions.
How do I charge the Watson BP-110 battery?
Use a compatible charger designed for BP-110 batteries. Connect the charger to a power outlet, insert the battery, and allow it to charge until the indicator shows full. Typical charging time is about 2 hours.
Can I use the Watson battery in place of the original Canon BP-110?
Yes, the Watson BP-110 is a direct replacement. It meets the same specifications and fits exactly like the original Canon battery, ensuring full compatibility.
How should I store the battery when not in use?
Store the battery in a cool, dry place away from direct sunlight and extreme temperatures. For long-term storage, keep it partially charged (around 50%) and recharge it every few months to maintain health.
How many charge cycles can the BP-110 battery endure?
The battery is rated for up to 500 charge cycles. After this time, its capacity may gradually decrease, but it will continue to function with reduced runtime.
What safety features does the battery have?
The Watson BP-110 includes built-in overcharge, over-discharge, and short-circuit protection to prevent damage to the battery and your device.
How do I clean and maintain the battery terminals?
Regularly inspect the metal contacts for dirt or oxidation. Clean them with a soft, dry cloth. Avoid using liquids or abrasive materials that could damage the contacts.
What is the warranty on the Watson BP-110?
The battery comes with a 2-year limited warranty from Watson against defects in materials and workmanship.
How should I dispose of the battery at the end of its life?
Do not throw it in regular trash. Dispose of lithium-ion batteries at a designated recycling center to comply with environmental regulations and ensure safe handling.
User questions about BP-110 Watson
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Camera battery in PDF format for free! Find your manual BP-110 - Watson and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BP-110 by Watson.