3DPEN-100 - 3D Pen Steren - Free user manual and instructions
Find the device manual for free 3DPEN-100 Steren in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Steren |
| Model | 3DPEN-100 |
| Product Type | 3D Printing Pen |
| Supported Filament | PLA and ABS |
| Filament Diameter | 1.75 mm |
| Nozzle Temperature Range | 160°C to 230°C |
| Heating Time | Approximately 1-2 minutes |
| Extrusion Speed | Adjustable, with variable speed control |
| Power Input | 100-240V AC, 50/60Hz |
| Power Consumption | 25W (typical) |
| Dimensions | Approximately 180 x 35 x 45 mm (7.1 x 1.4 x 1.8 in) |
| Weight | Approximately 200 g (without filament) |
| Cable Length | Approximately 1.5 m |
| Display | OLED or LCD temperature display |
| Temperature Control | Adjustable with preset buttons |
| Safety Features | Heat-resistant nozzle and automatic standby after idle |
| Maintenance | Regular cleaning of nozzle; use recommended filament |
| Spare Parts | Nozzles and heating elements available separately |
| Warranty | 1-year limited warranty |
| Certificate | CE, RoHS |
Frequently Asked Questions - 3DPEN-100 Steren
What is the best way to load filament into the 3DPEN-100?
Insert the filament into the filament feed slot at the top, turn on the pen, and select the recommended temperature for your filament type. Wait for the heating indicator, then press the extrusion button. Feed smoothly until you see the filament coming out of the nozzle.
What kinds of filament work with this 3D pen?
The 3DPEN-100 is designed for PLA and ABS filaments with a diameter of 1.75 mm. Avoid using filament that is too thick or contain particles, as it may clog the nozzle.
Why won't my 3D pen heat up?
Check that the power adapter is properly connected and the power outlet is working. If the display shows an error, let the pen cool down and restart it. In case of persistent issues, the heating element might need replacement.
How do I prevent nozzle clogging?
Use consistent filament quality, keep the nozzle clean after every session, and avoid leaving the pen heated with filament inside for long periods. Cleaning with a thin needle or a nozzle cleaner helps maintain flow.
What temperature should I use for PLA?
For PLA, set the temperature between 160°C and 200°C. Start at the lower end and adjust if the extrusion is uneven. The pen's display shows the current temperature.
How do I change from one filament to another?
While the pen is hot, pull out the old filament manually once the nozzle is free, or use the reverse function if available. Then insert the new filament and push until it flows out.
Can I use ABS filament safely?
Yes, the pen supports ABS. Set the temperature between 200°C and 230°C. Use it in a well-ventilated area, as ABS emits fumes when heated.
What safety measures should I follow while using the pen?
The nozzle becomes extremely hot. Keep it away from skin, hair, and flammable surfaces. Do not leave it unattended while turned on, and place it on a heat-resistant stand when paused.
How do I clean the nozzle after use?
After unplugging the pen and letting it cool slightly, wipe the exterior with a dry cloth. For the inside, heat the pen up, push a small amount of filament to clear residue, then use a fine needle to remove any particles.
Why is my extrusion uneven or stringy?
Uneven extrusion often results from temperature too low or a partial clog. Raise the temperature slightly, clean the nozzle, and ensure the filament is dry. Using a consistent speed also helps.
User questions about 3DPEN-100 Steren
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your 3D Pen in PDF format for free! Find your manual 3DPEN-100 - Steren and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 3DPEN-100 by Steren.
USER MANUAL 3DPEN-100 Steren
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Steren
Model : 3DPEN-100
Category : 3D Pen