SPLIT-2300 - Air conditioner Infiniton - Free user manual and instructions
Find the device manual for free SPLIT-2300 Infiniton in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Split air conditioner |
| Cooling capacity | 2300 W (approx. 8000 BTU/h) |
| Power supply | 220-240 V ~ 50 Hz |
| Refrigerant | R410A |
| Indoor unit dimensions (W x H x D) | 700 x 250 x 180 mm |
| Outdoor unit dimensions (W x H x D) | 700 x 500 x 250 mm |
| Indoor unit weight | 8 kg |
| Outdoor unit weight | 25 kg |
| Air flow volume | 400 m³/h |
| Noise level (indoor) | 28-40 dB(A) |
| Noise level (outdoor) | 50-55 dB(A) |
| Energy efficiency class | A+ |
| Operating modes | Cooling, heating, dehumidification, fan |
| Remote control | Yes, wireless |
| Timer | Yes, 24-hour programmable |
| Sleep mode | Yes |
| Auto restart | Yes |
| Air filter | Washable dust filter |
| Special features | Turbo cooling, eco mode, self-diagnosis |
| Installation type | Wall-mounted split system |
| Warranty | 2 years |
Frequently Asked Questions - SPLIT-2300 Infiniton
How do I install the SPLIT-2300 air conditioner?
Installation should be done by a certified technician. The indoor unit is mounted on the wall, while the outdoor unit is placed outside with proper refrigerant lines connecting them. Ensure the wall can support the weight and that there is adequate clearance for air circulation.
How do I clean the air filter?
Turn off the unit and open the front panel. Remove the washable dust filter, clean it with a vacuum or warm soapy water, rinse, and air dry completely before reinstalling. Clean the filter every two weeks for optimal performance.
The remote control is not working – what should I do?
First, replace the batteries in the remote. Ensure you are pointing it directly at the indoor unit and within range. Also check for any obstructions and verify that the remote's signal receiver is not blocked on the unit.
How do I set the timer?
Use the timer button on the remote control. Press it to activate the timer, then set the desired on/off time using the + and - buttons. The unit will automatically start or stop at the programmed time.
What does the 'sleep' mode do?
Sleep mode adjusts the temperature gradually to prevent colds and save energy. It typically raises the temperature by 1°C per hour over the first few hours and maintains a comfortable level while you sleep.
How can I reduce energy consumption?
Set the temperature to 24-26°C for cooling, use eco mode, close curtains during sunny hours, and ensure good insulation of the room. Clean the filter regularly and avoid over-cooling.
What should I do if the air conditioner makes a noise?
Check if the filters are clogged or if the outdoor unit is on a loose surface. Normal operation includes a low hum, but rattling or whirring may indicate loose parts or a need for professional inspection.
How do I switch between cooling and heating modes?
Press the mode button on the remote control. Each press cycles through Auto, Cool, Heat, Dry, and Fan. Select the desired mode and adjust the set temperature accordingly.
How often should I service the unit?
Perform basic maintenance like cleaning the filter every two weeks. A professional full service is recommended once a year to check refrigerant levels, electrical connections, and general system health.
What is the correct temperature setting for summer?
For comfort and energy savings, set the cooling temperature between 24°C and 26°C. Each degree lower increases energy use by about 6-8%, so moderate settings help reduce your electricity bill.
User questions about SPLIT-2300 Infiniton
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air conditioner in PDF format for free! Find your manual SPLIT-2300 - Infiniton and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SPLIT-2300 by Infiniton.