RF 808C3 - Juicer Riffel - Free user manual and instructions

Type of product	Centrifugal juicer
Brand	Riffel
Model	RF 808C3
Power consumption	800 W
Voltage	220-240 V, 50/60 Hz
Juice jug capacity	1 liter
Pulp container capacity	1.6 liters
Feed tube diameter	75 mm
Speed settings	2 speed levels
Product dimensions (H x W x D)	40 x 25 x 30 cm
Net weight	3.5 kg
Cord length	1.2 m
Material	Stainless steel, BPA-free plastic
Safety features	Safety lock system, non-slip feet
Functions	Juice extraction, pulp separation
Cleaning	Dishwasher-safe removable parts
Included accessories	Juice jug, pulp container, cleaning brush
Warranty	2 years
Repairability	Spare parts available

Frequently Asked Questions - RF 808C3 Riffel

How do I assemble the Riffel RF 808C3 juicer?

Place the pulp container on the base, then fit the filter basket and blade assembly onto the motor shaft. Lock the lid until you hear a click. Attach the juice jug to the spout. Ensure all parts are securely assembled before operation.

What is the correct way to use the juicer?

Wash fruits and vegetables, cut them into chunks that fit the feed tube. Turn the juicer on, select a speed (low for soft fruits, high for hard vegetables), and push ingredients gently with the pusher. Never insert fingers or utensils.

Can I juice citrus fruits like oranges with the RF 808C3?

Yes, you can juice peeled oranges and other citrus fruits. For best results, remove the pith and seeds to avoid a bitter taste. The pulp separator will help extract clear juice.

How do I clean the juicer after use?

Unplug the device and disassemble all removable parts. Rinse them under warm water and wash with mild detergent. The filter basket, lid, and pulp container are dishwasher-safe. Dry all parts before reassembly or storage.

What are the two speed settings for?

Use speed 1 for soft fruits like berries, bananas, and tomatoes. Use speed 2 for hard vegetables and fruits such as carrots, apples, and beets. Wrong speed settings can reduce juice yield or cause clogging.

Is the RF 808C3 safe to operate?

Yes, the juicer features a safety lock system that prevents the motor from starting unless all parts are correctly assembled. It also has non-slip feet for stability. Always switch off and unplug before opening or cleaning.

Can I juice leafy greens like spinach or kale?

Yes, wrap leafy greens around a harder ingredient like a cucumber or apple to help push them through the feed tube. Use high speed for best extraction. The 75 mm feed tube allows whole fruits and veggies.

What should I do if the juicer stops during operation?

The device may be overloaded. Turn it off, unplug, and remove the ingredients. Reduce the amount and try again. If the problem persists, check for jammed pulp and clear the filter basket before restarting.

Are replacement parts available for the RF 808C3?

Yes, Riffel provides spare parts such as the filter basket, jug, and lid. You can order them through authorized dealers or the official Riffel support website. Always use genuine parts for optimal performance and safety.

How do I store the juicer when not in use?

After cleaning and drying, place the juicer in a dry area. You can keep it assembled or disassemble it to save space. Wrap the cord around the base and use the cord storage to keep it tidy. Avoid storing near heat sources.

USER MANUAL RF 808C3 Riffel

Juicer/Blender With Dry Mill And Mincer

Model: RF 808C3

Please read instruction manual completely before operating this unit.

Important Operating Instructions

Read these instructions for use carefully before using the appliance and save them for future reference:

1. Check if the voltage indicated on the base of the appliance corresponds to the local voltage before you connect the appliance.

2. Do not use the appliance when the main cord, the plug or other components are damaged.

3. If the main cord is damaged, it must be replaced by designated service center or similarly qualified persons in order to avoid a hazard.

4. This appliance is intended for household use only.

5. Keep the appliance out of the reach of children. Special attention is necessary if child stand by your side.

6. Never let the appliance operate unattended.

7. Never use accessories or parts made by other manufacturer or that have not been specifically recommended, your guarantee will become invalid if you use such parts or accessories.

8. Place this appliance on the even surface before use, do not place it on or near hot surface, such as electric burner or on any hot surface.

9. Check the spinner every time you want to use the appliance, if detect any cracks or damage, do not use the appliance and contact the designated service center.

10. Make sure all parts are correctly mounted before you switch on the appliance.

11. Do not operate the appliance for more than 2 minutes at a time when heavy loads and let it cool down sufficiently afterwards by turning the switch knob to "O".

12. Never reach into the feeding tube with your fingers or an object while the appliances is running. Only the pusher is to be used for this purpose.

13. Only unlock the lever handle after you have switched the appliance off and the spinner has stopped rotating.

14. Do not remove the pulp collector when the appliance is in operation.

15. Do not touch the small cutting blades in the base of the spinner.

16. Always unplug the appliance after use.

17. Never immerse the motor unit in water or any other liquid. Do not rinse it either.

18. Put fruit into the feeding tube with fruit head downward before juice extracting, and use pusher to gently guide the fruit in.

Special Suggestions:

1. Remove fruit seeds and stones if it is the fruit with big seeds and stones, such as peach, apricot, plum and cherry etc; And peel off if it is the fruit with thick seedcase or the seedcases is inedible.
2. To extract more juice, don't push the pusher hastily.

Parts Description

Jujce Extractor Parts

Parts Description

1.Pusher
2. Feeding Tube
3. Transparent Cover
4.Spinner
5.Bowl
6.Pomace jar
7.Vane
8.Lever Handle

9.Switch Knob
10.Motor Unit
11.Cover
12.Blender Cup
13.Blender knife
14.Gasket
15.Base
16.Mill Cup

17.Mill Kinfe
18.Base
19.Stick
20.Cover
21.Mincer Cup
22.Gasket
23.Base
24.Mincer knife
25.Separator Cup

How to Use Juice Extractor

Place the bowl on motor unit.

Place the spinner over the vane and press it downward until it snaps into place.

Place transparent cover into the appliance by aligning pole to hole.

Fix lever handle by pushing it upwards.

Place the pulp collector under the pulp spout by tilting it forwards slightly.

Slide the pusher into the feeding tube by aligning the groove in the pusher, and place the foam separator under the juice spout before operation, Plug in and turn the switch knob to "I".

Be sure to tighten container base completely. Place ingredients in container. Cover

Place container on motor housing.

Plug in .Select one of two speed buttons as required. Use "PULSE" switch for precision blending.

After blending, switch off(0), unplug.

Turn mill upside down, and remove cutter base.

Place ingredients in container.

Tightly screw cutter base onto container.

Place mill on motor housing.

Plug in .Hold mill and press switch (2).

After grinding, switch off(0). Unplug.

Open the cover of the mincer

Place ingredients in container

Place mincer on motor housing

Plug in.Hold mincer and press switch(2)

After grinding, switch off(0). Unplug.

Cleaning Method and Suggestions

1. Switch the appliance off, remove the plug from the wall socket and wait until the spinner has stopped ratating.
2. Remove the dirty parts from the motor unit, disassemble the appliance in the following order:
3. Pull the lever handle off the shoulder by pushing it downwards
4. Remove the pulp collector
5. Remove the pusher
6. Remove the transparent cover
7. Remove the spinner

Clean these parts with water.

Clean motor unit with dry cloth, never immerse the motor unit in water nor rinse it under the tap.

Special Suggestions:

1. Discoloration of the plastic may occur with strongly-coloured fruits and vegetables, it is normal phenomena. To prevent this, wash the stained parts immediately after use.
2. Do not use abrasive cleaning agents, scourers, acetone, alcohol etc. to clean the appliance
3. Wash every parts(except motor unit)with neutral detergent,and wipe dry with soft cloth. Don't use harsh abrasives or corrosive detergent to avoid damage of parts.
4. Cutting blade is very sharp, pay more attention when clean it with brush,
5. For storage, make sure all the parts are dry enough, and store them in a clean and dry place.

Technical Data:

Voltage:220-240VAC

Frequency:50Hz

Power:800W

Rotation Speed:8000\~18000 RPM

Circuit Diagram:

RIFFEL

GIPFEL DES ERFOLGS

WWW.RIFFELAPPLIANCES.DE