QRN-410S - Video camera Hanwha - Free user manual and instructions
Find the device manual for free QRN-410S Hanwha in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Network security camera |
| Brand | Hanwha |
| Model | QRN-410S |
| Resolution | 4 megapixels (2560 x 1440) |
| Lens type | Fixed focal length, 2.8 mm |
| Field of view | Horizontal 110°, vertical 58° |
| Night vision | Infrared LEDs with 30 m range |
| Video compression | H.265, H.264, MJPEG |
| Connectivity | Ethernet (RJ-45) for network and PoE |
| Power supply | 12 V DC or Power over Ethernet (IEEE 802.3af) |
| Power consumption | Maximum 8 W |
| Dimensions (W x H x D) | 70 x 70 x 160 mm |
| Weight | 350 g |
| Housing material | Aluminum alloy, weatherproof |
| Ingress protection | IP66 |
| Mounting | Wall or ceiling mount bracket included |
| Operating temperature | -30°C to +55°C |
| Main functions | Motion detection, tamper alarm, IR night vision, H.265 compression |
| Maintenance and cleaning | Wipe the lens with a soft, dry microfiber cloth; keep the housing free of dust |
| Safety | Use only certified power supplies; disconnect from network before servicing |
| Spare parts and repairability | Replacement brackets and IR LEDs available from authorized Hanwha service centers |
| General information | Supports ONVIF protocol for integration with third-party systems |
Frequently Asked Questions - QRN-410S Hanwha
How do I reset the Hanwha QRN-410S to factory defaults?
Press and hold the reset button on the side of the camera for 10 seconds using a paperclip. The camera will reboot and restore default settings.
Contact your administrator for network changes.
Contact your administrator for network changes.
What is the default IP address and login credential?
The default IP is 192.168.1.100. The default username is admin and the password is a numeric code printed on the camera label. Always change it after first login.
How can I connect the camera to my network?
Connect an Ethernet cable from the camera's RJ-45 port to your router or PoE switch. If using a non-PoE switch, connect a 12V DC power adapter. Wait for the camera to boot and use the Hanwha SmartView software or web browser to configurate.
Does the QRN-410S support microSD cards for local storage?
Yes, the camera has a microSD card slot (supports up to 256 GB). Insert a card before powering the camera and format it in the web interface under Storage settings.
How do I set up motion detection alerts?
Log into the camera's web interface, go to Event > Motion Detection. Enable motion detection, draw a detection area, and set sensitivity. Then configure Notification to send emails or use RTSP to a recording system.
What is the maximum viewing distance at night?
The built-in IR LEDs provide a night vision range of approximately 30 meters (98 feet) in full darkness. The effective range may vary depending on scene conditions.
Can I view the camera remotely from my smartphone?
Yes, install the Hanwha SmartView app on your smartphone. Add the camera using its IP address or the QR code from the device label. Ensure port forwarding is configured on your router for remote access.
How do I update the firmware of the QRN-410S?
Download the latest firmware from the Hanwha support website. Log into the camera's web interface, go to System > Firmware Upgrade, upload the .exe file, and wait for the reboot. Do not disconnect power during the update.
Is the camera waterproof?
Yes, the QRN-410S has an IP66 rating, meaning it is fully protected against dust and powerful water jets, suitable for outdoor installation.
How to change the camera's video resolution?
Go to Video > Main Stream in the web interface. Select from resolutions like 2560x1440, 2048x1536, 1920x1080, etc. Click Apply and the camera will reboot to take effect.
User questions about QRN-410S Hanwha
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Video camera in PDF format for free! Find your manual QRN-410S - Hanwha and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. QRN-410S by Hanwha.
USER MANUAL QRN-410S Hanwha
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hanwha
Model : QRN-410S
Category : Video camera