Crestron

Vector CS1595-RH - Loudspeaker Crestron - Free user manual and instructions

Find the device manual for free Vector CS1595-RH Crestron in PDF.

📄 8 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Crestron Vector CS1595-RH - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product TypeIn-ceiling loudspeaker
ModelVector CS1595-RH
BrandCrestron
Driver Configuration2-way
Woofer15 inch polypropylene cone with rubber surround
Tweeter1 inch aluminum dome tweeter
Frequency Response40 Hz - 20 kHz
Nominal Impedance8 ohms
Power Handling (RMS)200 watts
Power Handling (Peak)400 watts
Sensitivity95 dB (1W/1m)
Coverage Angle90 degrees conical
Dimensions (Diam x Depth)20.9 in x 12.6 in (53.1 cm x 32.0 cm)
Cutout Diameter18.7 in (47.5 cm)
Weight18.6 kg (41.0 lb)
Connectors4-pin Euroblock connector (dual pair)
GrilleMagnetic, paintable steel grille
MountingIn-ceiling with dog-ear clamps
Operating Temperature0 C to 50 C
Enclosure MaterialHigh-impact polystyrene
ComplianceUL, cUL, CE
MaintenanceClean with dry soft cloth; avoid water and solvents
SafetyInstall with safety wire; follow local building codes
ReparabilityComponents are serviceable; contact Crestron for spare parts

Frequently Asked Questions - Vector CS1595-RH Crestron

How do I install the Crestron Vector CS1595-RH speaker in a ceiling?
To install the Vector CS1595-RH, cut a hole of the required 18.7 inch diameter in the ceiling. Insert the speaker, then tighten the dog-ear clamps using a screwdriver on the front face. Ensure the clamps grip the ceiling board securely. Connect the wires to the Euroblock connector before final insertion, and use a safety wire for additional security.
What is the recommended amplifier power for this speaker?
The speaker is rated for 200 watts RMS and 400 watt peak. To get the best performance, use an amplifier that delivers between 100 and 200 watts per channel into an 8 ohm load. Higher power is acceptable if used without clipping, but avoid overdrive.
What is the ideal ceiling thickness for mounting?
The dog-ear clamps require a ceiling thickness of 1/2 inch to 1-1/2 inches (12.7 mm to 38.1 mm). For thicker or thinner materials, adjust the clamp position or use optional mounting kits.
How do I connect the speaker to an amplifier?
Connect the amplifier output to the speaker's 4-pin Euroblock connector. The connector is labeled with + and - for each channel. Use 14-18 AWG stranded wire for best results. Ensure the amplifier is off while connecting.
Can the Vector CS1595-RH be used outdoors?
No, this speaker is designed for indoor use only. It is not weatherproof and must be installed in a temperature-controlled environment. For outdoor applications, choose a speaker with an IP rating.
What is the frequency response of this model?
The frequency response is 40 Hz to 20 kHz, which covers deep bass to high treble. This makes it suitable for full-range music and home theater systems.
How should I clean and maintain the speaker?
Use a dry soft cloth to wipe the grille and enclosure. Do not use water, solvents, or abrasive cleaners. Periodically check that the clamps and connections remain secure.
Is the grille paintable?
Yes, the magnetic grille is paintable if you wish to match your ceiling. Use water-based acrylic paint and keep the paint thin to avoid clogging the perforations.
What are the physical dimensions and cutout size?
The overall diameter is 20.9 inches and the depth is 12.6 inches. The required cutout diameter is 18.7 inches. These measurements are critical for proper installation.
How does the clamping mechanism work?
The speaker uses dog-ear clamps that rotate outward when you tighten the screws. This clamps the speaker to the ceiling from behind. The mechanism can accommodate ceiling thicknesses from 1/2 inch to 1-1/2 inches.

User questions about Vector CS1595-RH Crestron

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Loudspeaker in PDF format for free! Find your manual Vector CS1595-RH - Crestron and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Vector CS1595-RH by Crestron.

USER MANUAL Vector CS1595-RH Crestron

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Crestron

Model : Vector CS1595-RH

Category : Loudspeaker