XLS-100 - Uncategorized Epcom - Free user manual and instructions
Find the device manual for free XLS-100 Epcom in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Postal Scale |
| Brand | Epcom |
| Model | XLS-100 |
| Capacity | 100 g |
| Readability | 0.1 g |
| Weighing Units | Grams (g), Ounces (oz), Pennyweight (dwt), Troy Ounces (ozt) |
| Tare Function | Yes, subtracts container weight |
| Auto-Off | Yes, after 2 minutes of inactivity |
| Display | LCD screen with backlight |
| Power Source | 2 x AAA alkaline batteries |
| Dimensions (W x D x H) | 120 x 120 x 15 mm |
| Net Weight | 110 g |
| Platform Material | ABS plastic, removable for cleaning |
| Operating Temperature | 10 °C to 35 °C |
| Calibration | Automatic zero reset, manual calibration possible |
| Overload Protection | Indicates "O-Ld" to prevent damage |
| Maintenance | Wipe with a soft, dry cloth; avoid liquids |
| Safety | Do not exceed maximum load; keep away from water |
| Spare Parts | Batteries available; no user-serviceable parts |
| Repairability | Contact Epcom support for service |
| Recommended Use | Weighing letters, parcels, and small items |
Frequently Asked Questions - XLS-100 Epcom
How do I calibrate the Epcom XLS-100 scale?
To calibrate your Epcom XLS-100 digital scale, press and hold the MODE button for 5 seconds until 'CAL' appears on the display. Place a known 100g weight on the platform. The scale will automatically calibrate and return to weighing mode. For best results, calibrate at room temperature and on a stable, level surface.
How do I switch between weighing units?
Press the MODE button repeatedly to cycle through the available units: grams (g), ounces (oz), pennyweight (dwt), and troy ounces (ozt). The selected unit appears on the LCD display. The scale remembers the last unit used after power-off.
What does 'O-Ld' mean on the display?
'O-Ld' indicates overload. The item placed on the scale exceeds the maximum capacity of 100 g. Remove the item immediately to prevent damaging the sensor. If the message persists, remove the batteries and restart the scale.
How do I replace the batteries?
Turn the scale over and slide the battery cover off. Replace the two AAA alkaline batteries, ensuring correct polarity (+/-) as shown inside the compartment. Reattach the cover and press ON. Always dispose of old batteries according to local regulations.
Can the scale be cleaned with water?
No, the Epcom XLS-100 is not waterproof. To clean it, wipe the platform and housing with a soft, slightly damp cloth. Do not immerse any part of the scale in water or use chemical solvents. Remove the batteries before cleaning to avoid damage.
Why is the scale not turning on?
First, check that the batteries are correctly installed and have sufficient charge. If the display remains blank, try new batteries. Confirm the battery contacts are clean and free from corrosion. If the issue continues, the scale may need professional service.
Is the XLS-100 suitable for weighing precious metals?
Yes, the XLS-100 offers a precision of 0.1 g, making it suitable for small items such as coins, gems, and precious metals. Use the troy ounce (ozt) unit for jewelry trade. Always calibrate before conducting sensitive measurements.
How does the tare function work?
Place the container on the scale and wait for the weight to stabilize. Press the TARE button to zero the display. Now add the item to the container; the scale shows the net weight only. The tare can be reset by pressing TARE again with an empty platform.
Can I weigh items heavier than 100g?
No, the maximum capacity is 100g. Exceeding this limit may cause permanent damage to the load cell and voids the warranty. For heavier items, consider a higher-capacity Epcom model such as the XLS-200 or XLS-500.
What is the auto-off setting and can I disable it?
The scale automatically powers off after about 2 minutes of inactivity to conserve battery life. This feature cannot be disabled, but you can turn the scale back on with a quick touch of the ON/OFF button. Replacing batteries often reduces the runtime before auto-off.
User questions about XLS-100 Epcom
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual XLS-100 - Epcom and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. XLS-100 by Epcom.
USER MANUAL XLS-100 Epcom
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Epcom
Model : XLS-100
Category : Uncategorized