LCB2/0-38H-X - Uncategorized Panduit - Free user manual and instructions
Find the device manual for free LCB2/0-38H-X Panduit in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electrical Compression Lug |
| Brand | Panduit |
| Model | LCB2/0-38H-X |
| Wire Range (AWG) | 2/0 AWG |
| Stud Size (inches) | 3/8 |
| Number of Holes | 1 |
| Barrel Type | Long barrel, heavy duty |
| Material | High-conductivity copper |
| Finish | Tin-plated |
| Voltage Rating | 600 V (typical) |
| Operating Temperature Range | -40 to 90 °C (typical) |
| Recommended Crimping Tool | Panduit CT-2930 or CD-2000 series |
| Standards | UL 486A-486B, CSA C22.2 |
| RoHS Compliant | Yes |
| Overall Length (inches) | Approx. 2.60 |
| Barrel Length (inches) | Approx. 1.40 |
| Width (inches) | Approx. 0.76 |
| Thickness (inches) | Approx. 0.22 |
| Hole Diameter (inches) | 0.406 |
| Mounting Type | Bolt-on |
| Conductor Type | Stranded copper |
| Packaging Quantity | Sold individually |
Frequently Asked Questions - LCB2/0-38H-X Panduit
What is the Panduit LCB2/0-38H-X used for?
The LCB2/0-38H-X is a compression lug designed for terminating 2/0 AWG copper conductors to a 3/8-inch stud. It provides a reliable, low-resistance connection in electrical power systems.
What wire gauge is compatible with the LCB2/0-38H-X?
This lug is compatible with 2/0 AWG stranded copper wire. Always verify the conductor size before crimping to ensure proper performance.
What size stud fits the LCB2/0-38H-X?
The LCB2/0-38H-X has a 3/8-inch hole, which fits a standard 3/8-inch bolt or stud. This is a common size for electrical panels and busbars.
What crimping tool should I use with this lug?
Panduit recommends using a CT-2930 or CD-2000 series crimping tool with the appropriate die. These tools provide the correct crimp profile and force for the heavy-duty long barrel design.
What is the voltage rating of the LCB2/0-38H-X?
The lug is typically rated for 600 V AC/DC, making it suitable for most industrial and commercial wiring applications. Always follow local electrical codes.
Can this lug be used for aluminum conductors?
No, the LCB2/0-38H-X is designed for copper conductors only. Using it with aluminum could cause galvanic corrosion and connection failure.
How do I properly crimp the LCB2/0-38H-X?
Strip the insulation to the proper length, insert the conductor fully into the barrel, and use a ratchet crimping tool to apply the correct crimp. Follow the die chart for tool settings and perform one indentation in the center and one at the edge for heavy-duty lugs.
What torque should I apply to the mounting bolt?
The torque depends on the bolt size and application. For a 3/8-inch stud, typical torque values are between 20-30 Nm (15-22 ft-lb). Consult the installation specifications or a qualified electrician.
Is the LCB2/0-38H-X corrosion-resistant?
Yes, the lug has a tin-plated finish that provides excellent corrosion resistance and maintains a stable contact surface for copper conductors.
What warranty does Panduit offer for this product?
Panduit provides a standard limited warranty against defects in materials and workmanship. For specific terms, refer to the product documentation or contact Panduit support.
User questions about LCB2/0-38H-X Panduit
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual LCB2/0-38H-X - Panduit and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LCB2/0-38H-X by Panduit.
USER MANUAL LCB2/0-38H-X Panduit
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Panduit
Model : LCB2/0-38H-X
Category : Uncategorized