Silueta 70 - Range hood MEPAMSA - Free user manual and instructions
Find the device manual for free Silueta 70 MEPAMSA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Range hood |
| Brand | Mepamsa |
| Model | Silueta 70 |
| Mounting type | Wall-mounted |
| Product dimensions (W × D × H) | 70 cm × 50 cm × 30 cm |
| Weight | 12 kg |
| Power supply voltage | 220–240 V |
| Power supply frequency | 50 Hz |
| Max suction power | 600 m³/h |
| Number of speeds | 3 |
| Noise level (max) | 65 dB(A) |
| Lighting | LED |
| Grease filter material | Aluminum |
| Optional activated carbon filter | Yes |
| Control type | Push-button |
| Extraction type | Ducted / Recirculating |
| Energy class | B |
| Max air flow with ducted installation | 600 m³/h |
| Filter saturation indicator | No |
| Recommended maintenance frequency | Clean filters monthly |
Frequently Asked Questions - Silueta 70 MEPAMSA
How do I clean the grease filters on the Mepamsa Silueta 70?
Remove the aluminum grease filters and wash them by hand with warm soapy water or in the dishwasher at a low temperature. Let them dry completely before reinstalling them. Cleaning should be done every 4–6 weeks depending on usage.
Can I use the Silueta 70 in recirculation mode without a chimney?
Yes, the hood can be used in recirculation mode by installing an activated carbon filter. This filter absorbs odors and is not supplied in the box. The air is cleaned and returned into the kitchen.
How often should I replace the activated carbon filter?
The activated carbon filter should be replaced approximately every 3–6 months for optimal performance. Replacement is needed when you notice reduced odor absorption or increased noise.
What is the maximum noise level of the Silueta 70?
The maximum noise level measured in dB(A) is around 65 dB at the highest speed. At lower speeds, the noise is significantly reduced.
Does the hood come with LED lighting?
Yes, the Silueta 70 is equipped with LED lighting that provides efficient illumination for your cooking surface while consuming low energy.
How do I install the Silueta 70 range hood?
Installation must be done according to the user manual. Generally, mount the canopy to the wall at the recommended height above the hob, connect the exhaust duct (or install the carbon filter), and then wire the hood to the 220-240 V mains. Ensure proper safety distances are respected.
What are the dimensions of the Mepamsa Silueta 70?
The hood has a width of 70 cm, a depth of 50 cm and a height of 30 cm. The telescopic chimney covers the ducting and can be extended from 65 cm to 110 cm (if applicable). Refer to the manual for exact installation measurements.
Is professional installation required?
While it is possible to install the hood yourself, professional installation is recommended to ensure the electrical connections and ducting are correctly handled. Always follow local safety regulations.
How do I reset the filter saturation indicator?
The Silueta 70 does not have a built-in filter saturation indicator. In that case, simply maintain a regular cleaning schedule. For carbon filters, replace them promptly according to the timer you set.
What type of grease filter is used and how to maintain it?
The hood uses aluminum grease filters that trap grease and oil particles. Clean them regularly by hand or in the dishwasher to maintain performance and safety. A clogged grease filter reduces airflow and increases noise.
User questions about Silueta 70 MEPAMSA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual Silueta 70 - MEPAMSA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Silueta 70 by MEPAMSA.