4TS861X - Washing machine LYNX - Free user manual and instructions

Product type	Freestanding washing machine
Brand	Lynx
Model	4TS861X
Load capacity	8 kg
Maximum spin speed	1200 rpm
Energy efficiency class	C
Water consumption per cycle	52 liters
Noise level (wash/spin)	58 dB / 76 dB
Dimensions (H x W x D)	85 x 60 x 62 cm
Net weight	70 kg
Power supply	220-240 V~, 50 Hz
Rated power	2200 W
Water pressure	0.05-1 MPa
Drum volume	63 liters
Drum material	Stainless steel
Door opening angle	180 degrees
Wash programs	Cotton, Synthetics, Delicates, Wool, Quick, Night, Intensive
Display	LED with remaining time and delay indicator
Functions	Delay start, child lock, foam control, unbalance detection
Maintenance	Clean detergent drawer and door gasket monthly; clean pump filter every 2 months
Safety features	Anti-overflow, overheating protection, child lock with door lock
Spare parts availability	10 years after purchase
Manual download	Free PDF user manual available on notice-facile.com

Frequently Asked Questions - 4TS861X LYNX

How do I install the Lynx 4TS861X washing machine?

Place the machine on a hard level floor. Remove all transport bolts, connect the inlet hose to a 3/4 inch threaded tap and check the drain hose is not kinked. Do not plug the appliance in before all connections are tightened.

Why does the drum not spin at the end of a cycle?

A spin cycle may be skipped if the laundry is unbalanced, the filter is blocked, or the machine is overloaded. Try reducing the load to 8 kg, untangle heavy items and clean the drain pump filter.

How should I clean the detergent drawer?

Press the release button, slide out the drawer and rinse it under warm water. Clean the dispensing recess with a soft brush and dry the drawer before reinserting it. Repeat this maintenance every two months.

What does the delay start function do?

Delay start lets you set a time interval between 1 and 24 hours before the wash begins. Press the delay start button repeatedly and confirm with the Start/Pause key.

Are there any special requirements for the water supply?

Use a cold water connection with a pressure between 0.05 MPa and 1 MPa and a 3/4 inch threaded tap. The inlet hose must not be bent or pinched during the installation.

Can I open the door during a wash program?

The door is locked while the machine is operating. You can pause the program with the Start/Pause button, and if the water temperature is below 50 degrees Celsius and the drum level is safe, the door unlocks after a few seconds.

Which programs are available on the 4TS861X?

The machine includes cotton, synthetics, delicates, wool, quick wash, night and intensive programs. The maximum load is 8 kg for cotton and lower for delicate fabrics.

How do I activate the child lock?

Press and hold the child lock key for about three seconds until the lock indicator lights up. The control panel is then locked to prevent accidental settings changes.

What can I do to prevent bad smells?

Leave the door and detergent drawer slightly open between washes, run a hot maintenance wash at 90 degrees Celsius once a month with an empty drum, and clean the rubber door seal regularly.

How do I obtain spare parts if something breaks?

Lynx supports the 4TS861X with spare parts available for 10 years after purchase. Contact the official after-sales service with the complete product code and serial number printed on the identification plate.

USER MANUAL 4TS861X LYNX

Lavadora

4

13