EW 5512 - Washing machine Eurotech - Free user manual and instructions
Find the device manual for free EW 5512 Eurotech in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Washing machine |
| Brand | Eurotech |
| Model number | EW 5512 |
| Rated capacity | 5.5 kg |
| Maximum spin speed | 1200 rpm |
| Drum type | Stainless steel |
| Number of programs | 15 washing programs |
| Display | LED digital display |
| Delay start | Up to 24 hours |
| Child lock | Yes |
| Energy efficiency class | A+++ |
| Water consumption per cycle | 45 liters |
| Noise level (wash) | 58 dB |
| Noise level (spin) | 76 dB |
| Dimensions (H x W x D) | 85 cm x 60 cm x 55 cm |
| Weight | 70 kg |
| Power supply | 220-240 V, 50 Hz |
| Power consumption | 2200 W |
| Water supply | Cold water only |
| Installation type | Freestanding |
| Door opening angle | 180 degrees |
| Key programs | Quick wash, cotton, synthetic, delicate, wool |
| Maintenance tasks | Clean filter regularly, descale periodically |
Frequently Asked Questions - EW 5512 Eurotech
How do I clean the detergent drawer?
To clean the detergent drawer, first pull it out completely. Rinse it under warm water to remove any residue. Use a soft brush or cloth to clean the compartments. For stubborn buildup, soak the drawer in a solution of warm water and mild detergent. Make sure the drawer is completely dry before sliding it back into the machine. Regular cleaning every 2-3 months prevents mold and ensures proper dispensing.
Why does the washing machine vibrate excessively during the spin cycle?
Excessive vibration is often caused by an unbalanced load or incorrect installation. Check that the machine is level and all four feet are firmly in contact with the floor. Tighten the locknuts on the feet if necessary. Also, avoid overloading or washing a single heavy item (like a duvet) alone, as this can cause imbalance. Make sure all transit bolts were removed after installation.
What should I do if the door doesn't open after a cycle?
Wait a few minutes after the cycle ends to allow the door lock to disengage. If it still doesn't open, check if there is water left in the drum; the machine prevents opening if there is water. Run a drain or spin program to empty the drum. If the problem persists, the door lock may be faulty and need replacement. Always disconnect power before inspecting the lock mechanism.
How often should I clean the pump filter?
Clean the pump filter every 2-3 months to prevent blockages and ensure efficient draining. Open the lower access panel, place a towel underneath to catch water, and unscrew the filter counterclockwise. Remove any lint or foreign objects. Rinse the filter under running water and reinsert it securely. Regular cleaning extends the life of the drain pump.
Can I wash delicate clothes on a quick wash program?
It depends on the program selected. The quick wash program uses a shorter cycle and higher spin speed, which may be too aggressive for delicate fabrics. For delicates, use the delicate or wool program with a cold or low temperature and reduced spin speed. Always check the care label on your garments before choosing a cycle.
How do I use the child lock feature?
To activate the child lock, press and hold the Child Lock button for 3 seconds until the indicator light turns on. This disables all buttons and prevents accidental setting changes during the cycle. To deactivate, press and hold the same button for 3 seconds again. The feature remains active even if the machine is switched off, until you deactivate it manually.
What is the maximum load for a cotton cycle?
The maximum load for a cotton cycle is 5.5 kg of dry laundry. Do not overload, as this can reduce washing efficiency and strain the motor. For best results, fill the drum loosely. If you need to wash larger items, use a bulk program or reduce the load size.
Why is there water leaking from the bottom of the machine?
Water leakage is often caused by a clogged pump filter, a loose hose connection, or a damaged door seal. First, check the pump filter for blockages. Inspect the inlet and drain hoses for cracks or loose fittings. Also examine the rubber door seal for foreign objects or damage. If the leak persists, contact a qualified technician.
How do I descale the washing machine?
Descaling removes limescale buildup that affects heating efficiency. Run an empty cycle at 60°C with a descaling agent or a cup of white vinegar poured into the detergent drawer. After the cycle, wipe the drum and door seal. For areas with hard water, descale every 3 months. Do not use more than the recommended amount, as foam may overflow.
What does error code E20 indicate?
Error code E20 typically indicates a drainage problem. This means the machine cannot pump out water. Check that the drain hose is not kinked or obstructed. Clean the pump filter thoroughly, as lint or coins may be blocking it. If the error persists, the drain pump may be faulty and needs replacement. Consult the manual for troubleshooting or contact support.
User questions about EW 5512 Eurotech
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Washing machine in PDF format for free! Find your manual EW 5512 - Eurotech and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EW 5512 by Eurotech.
USER MANUAL EW 5512 Eurotech
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Eurotech
Model : EW 5512
Category : Washing machine