I-ALARM Gas Detector - Gas detector Techly - Free user manual and instructions
Find the device manual for free I-ALARM Gas Detector Techly in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Gas detector for natural gas and propane |
| Brand | Techly |
| Model | I-ALARM |
| Detection gases | Natural gas (methane) and LPG (propane) |
| Power supply | AC adapter 230V, 50Hz with battery backup |
| Alarm level | Audible alarm ≥85 dB at 1 meter |
| Sensitivity | Detects gas leaks from 10% LEL |
| Installation | Wall-mounted or flat surface placement near gas sources |
| LED indicators | Power (blue) and Alarm (red) |
| Test button | Manual test button for function verification |
| Dimensions | Approximately 11.5 x 8.5 x 4.2 cm |
| Weight | Approximately 200 g |
| Operating temperature | -10°C to +50°C |
| Humidity range | 5% to 90% RH (non-condensing) |
| Color | White plastic housing |
| Certification | CE and RoHS compliant |
| Power consumption | Less than 2 W standby |
| Maintenance | Clean with soft dry cloth; test monthly |
| Safety features | Low battery warning, alarm auto-reset, overheat protection |
| Spare parts | No user-serviceable parts; battery compartment accessible for replacement |
Frequently Asked Questions - I-ALARM Gas Detector Techly
How do I install the Techly I-ALARM gas detector?
Install the detector at a height suitable for the gas type. For natural gas, mount it near the ceiling for propane near the floor. Secure it with screws or double-sided tape in the recommended location.
What gases does the detector detect?
It detects natural gas (methane) and liquefied petroleum gas (propane). It is not designed for carbon monoxide or smoke.
How often should I test the detector?
Test the unit monthly by pressing the test button. Also, verify the power LED and replace batteries as needed.
Why does the alarm go off without any leak?
Possible causes include dust buildup, high humidity, or strong solvents. Clean the vents and ensure proper placement away from steam or cooking fumes.
Can I replace the battery myself?
Yes, the battery compartment is accessible. Use the specified 9V alkaline battery or AC adapter as per manual, and observe polarity.
What should I do when the detector alarms?
Do not ignore the alarm. Evacuate the area, turn off gas supply if possible, and call emergency services or the gas provider from outside.
Where is the best place to mount the detector?
Install it in the same room as gas appliances, at a distance of 1.5 to 3 meters from them, and away from windows and drafts.
Does the detector need calibration?
The sensor is factory-calibrated and requires no field calibration. Replace the unit every 5-7 years for optimal performance.
What is the warranty period?
Techly offers a 2-year limited warranty against manufacturing defects. Keep your receipt and register the product online if required.
How do I clean and maintain the detector?
Wipe the exterior with a soft dry cloth and vacuum the vents gently. Avoid using moisture or cleaners, and test the alarm after cleaning.
User questions about I-ALARM Gas Detector Techly
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Gas detector in PDF format for free! Find your manual I-ALARM Gas Detector - Techly and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. I-ALARM Gas Detector by Techly.
USER MANUAL I-ALARM Gas Detector Techly
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Techly
Model : I-ALARM Gas Detector
Category : Gas detector