NM-1FE1CE1B= - Router CISCO - Free user manual and instructions
Find the device manual for free NM-1FE1CE1B= CISCO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Module |
| Brand | Cisco |
| Model | NM-1FE1CE1B= |
| Category | Router Module |
| Ports | 1 x Fast Ethernet (10/100), 1 x E1/CE1 (G.703) |
| Compatibility | Cisco 2600, 3600 series routers |
| Form Factor | Network Module (NM) |
| Data Rate | Fast Ethernet up to 100 Mbps; E1 up to 2.048 Mbps |
| Interface Connectors | 1 x RJ-45, 1 x DB-15 |
| Dimensions | 7.1 x 7.2 x 1.2 in (18.0 x 18.3 x 3.0 cm) |
| Weight | 1.5 lb (0.68 kg) |
| Power Consumption | 15 W |
| Operating Temperature | 0 to 40°C (32 to 104°F) |
| Storage Temperature | -20 to 70°C (-4 to 158°F) |
| Humidity | 5% to 90% non-condensing |
| Status LEDs | Link and activity for Ethernet and E1 ports |
| Management | Supports Cisco IOS CLI, SNMP |
| Security Features | VPN support and encryption via Cisco IOS |
| Maintenance | Keep vents clean; periodically check cable connections |
| Repairability | Field-replaceable module; no user serviceable parts inside |
| Standards | IEEE 802.3, G.703 |
| Warranty | Standard Cisco limited warranty |
Frequently Asked Questions - NM-1FE1CE1B= CISCO
What is the Cisco NM-1FE1CE1B= used for?
The Cisco NM-1FE1CE1B= is a network module that provides one Fast Ethernet port and one E1/CE1 port, allowing integration of LAN and WAN connectivity in compatible Cisco routers.
Which routers are compatible with this module?
This module is designed for Cisco 2600 and 3600 series routers. Check your router's documentation to confirm slot compatibility and IOS version requirements.
What are the main ports on the NM-1FE1CE1B=?
It features one Fast Ethernet (10/100 Mbps) port using an RJ-45 connector and one E1/CE1 port using a DB-15 connector for WAN connections.
How do I install the NM-1FE1CE1B= in my router?
Power off the router, remove the blank cover from an available network module slot, insert the module firmly into the slot, and secure the screws. Then power on and verify detection via show diag or show version.
Can I use both the Fast Ethernet and E1 ports simultaneously?
Yes, both ports can operate simultaneously. They are independent interfaces, allowing LAN traffic on Fast Ethernet and WAN traffic on E1 at the same time.
Does this module support VPN or encryption?
The module itself does not perform encryption, but it works with Cisco IOS features to support VPN tunnels and IPsec encryption when used with a compatible router and software.
How do I troubleshoot connectivity issues with the E1 port?
Check the physical cable and connector, verify E1 framing and line coding settings via the router's controller configuration, and use show controllers e1 to inspect alarm and error statistics.
Is the NM-1FE1CE1B= hot-swappable?
No, this module is not hot-swappable. You must power down the router before installing or removing the module to prevent damage to the hardware.
What are the LED indicators on the module and what do they mean?
The module has Link and Activity LEDs for each port. A solid light indicates a link, while blinking shows traffic. If both are off, check cabling and interface configuration.
Where can I find the user manual or documentation?
You can download the user manual from the Cisco website or from notice-facile.com in PDF format. Search for the model number NM-1FE1CE1B= to get the official guide.
User questions about NM-1FE1CE1B= CISCO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual NM-1FE1CE1B= - CISCO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. NM-1FE1CE1B= by CISCO.