RAD-701 - Intercom Steren - Free user manual and instructions
Find the device manual for free RAD-701 Steren in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Wired audio intercom |
| Brand | Steren |
| Model | RAD-701 |
| Communication mode | Full duplex |
| Number of units | 2 (master and remote) |
| Wire connection | 2-wire low voltage |
| Maximum range | Up to 300 m |
| Power supply | 12V DC adapter (included) |
| Power consumption | Standby: 0.5 W, active: 2 W |
| Volume control | Adjustable on master unit |
| Ringtone | Selectable melody |
| Call button | Yes, on remote unit |
| Handsfree operation | Yes |
| LED indicator | Power and call status |
| Mounting | Wall mountable |
| Dimensions (W x H x D) | 180 x 110 x 45 mm |
| Weight | 420 g per unit |
| Material | ABS plastic |
| Color | White |
| Operating temperature | 0°C - 40°C |
| Cleaning instructions | Wipe with dry cloth |
| Repairability | Replaceable power supply and handset |
Frequently Asked Questions - RAD-701 Steren
How do I install the RAD-701 intercom?
Connect the two units with 2-wire cable. Mount each unit on a wall using the provided screws. Connect the 12V adapter to the master unit. Press the call button to test. Ensure wires are not crossed.
What should I do if there is no sound during communication?
Check the power supply, verify the wiring connections, and adjust the volume level on the master unit. Make sure the intercom is not in mute mode.
Can I connect more than two RAD-701 units?
The RAD-701 is designed for point-to-point communication between two stations. Adding extra units is not recommended as it may cause signal degradation.
How do I clean the intercom without damaging it?
Use a soft dry cloth to wipe the exterior. Do not use abrasive cleaners or solvents. Avoid getting moisture into the openings.
Is the RAD-701 suitable for outdoor use?
The device is intended for indoor use. Exposure to rain or extreme weather may damage the electronics. If mounting outdoors, protect it with a weatherproof enclosure.
What is the maximum distance between the master and remote unit?
The recommended maximum range is 300 meters using proper 2-wire cable. Longer distances may cause noise and audio distortion.
Does the intercom require any configuration or programming?
No, the RAD-701 is plug-and-play. Simply connect the units and power supply, then press the call button to communicate.
What type of cable should I use for wiring?
Use a two-conductor shielded cable (e.g., 18-22 AWG) to minimize interference. Keep the cable away from power lines to avoid hum.
How do I change the ringtone on the master unit?
Press the melody button on the master unit repeatedly to cycle through the built-in ringtones. The selected ringtone will be stored.
What maintenance is required for the RAD-701?
Regularly inspect the wiring and connectors for damage. Keep the device dust-free. If the power supply fails, replace it with an identical 12V DC adapter to ensure safe operation.
User questions about RAD-701 Steren
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Intercom in PDF format for free! Find your manual RAD-701 - Steren and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RAD-701 by Steren.
USER MANUAL RAD-701 Steren
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Steren
Model : RAD-701
Category : Intercom