AMP-080 - Hi-Fi System Steren - Free user manual and instructions
Find the device manual for free AMP-080 Steren in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Steren |
| Model | AMP-080 |
| Product Type | Hi-Fi Stereo Amplifier |
| Output Power (RMS) | 80W per channel (8 ohms) |
| Number of Channels | 2 (Stereo) |
| Frequency Response | 20 Hz - 20 kHz |
| Total Harmonic Distortion | < 0.05% |
| Signal-to-Noise Ratio | > 90 dB |
| Input Sensitivity | 300 mV |
| Input Connectors | 4x analog RCA line inputs |
| Output Connectors | 2x speaker terminals, 1x headphone jack |
| Speaker Impedance | 4 - 8 ohms |
| Tone Controls | Bass and Treble adjustment |
| Balance Control | Yes |
| Power Supply | AC 120V, 60Hz |
| Power Consumption | 300W maximum |
| Standby Power | < 1W |
| Dimensions (W x H x D) | 430 x 130 x 340 mm |
| Weight | 7 kg |
| Cabinet Material | Metal chassis with aluminum front panel |
| Protection Circuits | Short circuit and thermal protection |
| Accessories | Remote control, power cord, user manual |
| Maintenance | Wipe with a soft, dry cloth |
| Safety Certification | NOM certification |
| Reparability | Service by authorized Steren centers |
Frequently Asked Questions - AMP-080 Steren
How do I connect the AMP-080 to my speakers?
Connect the right speaker to the red and black terminals labeled R and the left speaker to the L terminals. Ensure the speaker wires are securely fastened and match polarity to avoid phase cancellation.
What is the maximum power output of the AMP-080?
The AMP-080 delivers 80 watts per channel into 8 ohm speakers, making it suitable for medium-sized rooms and bookshelf speakers.
Can I use the AMP-080 with a turntable?
The amplifier does not have a dedicated phono input, but you can connect a turntable with a built-in preamp to one of the line inputs. If your turntable lacks a preamp, you will need an external phono stage.
Why is there no sound from one channel?
Check the speaker connections and the balance control. Confirm that the input source is stereo and not mono. If the issue persists, try swapping speakers to identify if the problem is in the amplifier or the source.
How do I clean the AMP-080?
Unplug the unit and use a soft, dry cloth to wipe the exterior. Never use liquid cleaners or abrasive materials. You can gently vacuum the vents to remove dust.
Does the AMP-080 come with a remote control?
Yes, the package includes a remote control for basic functions like volume, mute, and input selection. It requires a CR2025 battery.
Can I connect multiple audio sources at the same time?
Yes, the AMP-080 has 4 line inputs (CD, AUX, TAPE, and VIDEO). You can connect up to four sources and switch between them using the input selector.
What kind of speaker wire should I use?
Use 16-gauge oxygen-free copper wire for lengths up to 10 meters. For longer runs, use a thicker wire (14-gauge) to minimize signal loss.
Is the AMP-080 compatible with 220V mains?
No, the AMP-080 is designed for 120V AC (North American standard). Using it with 220V without a step-down transformer will damage the unit.
How do I reset the amplifier after a protection trip?
The protection circuit activates to safeguard the amplifier from short circuits or overheating. Turn off the unit, disconnect all inputs and outputs, wait 15 minutes, then reconnect and turn it on again. If the issue reoccurs, contact authorized service.
User questions about AMP-080 Steren
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Hi-Fi System in PDF format for free! Find your manual AMP-080 - Steren and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AMP-080 by Steren.
USER MANUAL AMP-080 Steren
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Steren
Model : AMP-080
Category : Hi-Fi System