CCTV-0960 - Security Camera Steren - Free user manual and instructions
Find the device manual for free CCTV-0960 Steren in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Security Camera |
| Brand | Steren |
| Model | CCTV-0960 |
| Image Sensor | 1/3-inch CMOS |
| Resolution | 700 TVL |
| Lens | 3.6 mm fixed lens |
| Night Vision | Infrared LEDs, up to 20 m |
| Minimum Illumination | 0.1 lux (color) |
| Video Output | Composite 1.0 V p-p / 75 ohms (BNC) |
| Signal System | NTSC / PAL (switchable) |
| Horizontal Angle of View | 70 degrees |
| Power Supply | 12 V DC, 1 A adapter included |
| Power Consumption | 5 W max |
| Dimensions (W x D x H) | 60 x 55 x 120 mm |
| Weight | 350 g |
| Protection Rating | IP66 weatherproof |
| Mounting | Wall or ceiling bracket included |
| Connections | BNC video, DC power plug |
| Operating Temperature | -10°C to 50°C |
| Care and Cleaning | Clean the lens with a soft, dry cloth. Do not use solvents. |
| Safety Precautions | Do not expose to rain or moisture unless properly rated. Handle with care. |
| Spare Parts and Repairability | No user-serviceable parts inside. Contact Steren support for repairs. |
Frequently Asked Questions - CCTV-0960 Steren
How do I connect the CCTV-0960 camera to a DVR or monitor?
Use a BNC cable to connect the camera's video output to the video input of a DVR or monitor. For power, connect the included 12V DC adapter to a power outlet. Make sure the camera is powered on and the signal system (NTSC/PAL) matches your DVR or monitor.
Can I install this camera outdoors?
Yes, the CCTV-0960 has an IP66 weatherproof housing, meaning it is protected against dust and strong water jets. It is suitable for outdoor installation, but avoid placing it in direct rain or submersion. Use the included mounting bracket for wall or ceiling installation.
What power supply does the Steren CCTV-0960 require?
This camera operates on 12 volts DC and draws up to 1 amp. A compatible power adapter is included in the package. Always use the provided adapter to avoid damage due to incorrect voltage.
How do I switch between NTSC and PAL video formats?
The CCTV-0960 supports both NTSC and PAL formats. Usually, there is a small switch or jumper on the camera's circuit board. Refer to the manual for the exact location. Change the switch position, then reconnect the camera to your DVR or monitor.
Why is the night vision not working?
Night vision relies on infrared LEDs that activate automatically in low light conditions. If it's not working, check that the camera is not placed behind a glass window (glass blocks IR), and ensure that the IR LED switch (if any) is set to ON. Clean the LEDs with a soft cloth. If the issue persists, the camera may need servicing.
Is the CCTV-0960 a wireless camera?
No, the CCTV-0960 is a wired analog camera. It requires a BNC cable for video and a DC power cable for connection. It is not Wi-Fi enabled, so you will need a DVR or monitor with a compatible input.
How do I clean the camera lens properly?
To clean the lens, use a soft, dry microfiber cloth to gently wipe the surface. Do not use abrasive materials, solvents, or water directly on the lens. For the housing, a slightly damp cloth is acceptable, but make sure the camera is disconnected from power first.
Can this camera be used in extremely cold or hot temperatures?
The CCTV-0960 has an operating temperature range from -10°C to 50°C. In colder climates, condensation may occur inside the housing; it is recommended to check the seals and use a suitable enclosure if temperatures drop below this range.
What should I do if there is no image on the monitor?
First, verify that the camera is connected to power and that the power LED is on. Check the BNC cable for damage and ensure it is firmly connected to the camera and monitor/DVR. Confirm that the video format (NTSC/PAL) matches. Try a different video input or cable to isolate the problem. If the issue remains, test with another camera to rule out a monitor fault.
How can I adjust the viewing angle of the camera?
The CCTV-0960 comes with a 3.6 mm fixed lens, so the field of view is fixed at about 70 degrees. To change the angle, physically reposition the camera using the mounting bracket. Loosen the bracket's adjustment screws, aim the camera to the desired location, then tighten the screws securely.
User questions about CCTV-0960 Steren
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual CCTV-0960 - Steren and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CCTV-0960 by Steren.
USER MANUAL CCTV-0960 Steren
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Steren
Model : CCTV-0960
Category : Security Camera