CXP-115 - Loudspeaker Laney - Free user manual and instructions
Find the device manual for free CXP-115 Laney in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Passive PA Loudspeaker |
| Brand | Laney |
| Model | CXP-115 |
| Woofer Size | 15 inches |
| HF Driver | 1-inch compression driver |
| Power Handling (RMS) | 250 W |
| Power Handling (Peak) | 500 W |
| Impedance | 8 Ω |
| Sensitivity | 98 dB SPL (1W/1m) |
| Frequency Response | 55 Hz - 20 kHz |
| Enclosure Type | Bass reflex with internal bracing |
| Input Connectors | 2x SpeakON, 1x 1/4" jack |
| Mounting Facility | 36 mm pole socket |
| Dimensions (W x H x D) | 450 x 700 x 400 mm |
| Weight | 21 kg |
| Recommended Amplifier Power | 300 - 500 W RMS into 8 Ω |
| Cleaning | Wipe with a dry, soft cloth |
| Safety Recommendations | Place on stable flat surface; protect from moisture |
| Spare Parts & Repairability | Replaceable woofer and compression driver; service through Laney authorized centers |
| Intended Use | Live sound, PA, DJ, karaoke |
Frequently Asked Questions - CXP-115 Laney
How do I connect the CXP-115 to my amplifier?
Use a SpeakON or 1/4'' jack cable from the amplifier output to one of the speaker's input connectors. Ensure the amplifier is switched off during connection and that the impedance matches (8 Ω).
Can I use this speaker with an 8-ohm amplifier?
Yes, the CXP-115 has a nominal impedance of 8 Ω, so it is designed to operate with any amplifier rated for 8 Ω loads.
What is the difference between passive and active speakers?
A passive speaker like the CXP-115 needs an external amplifier or mixer with a built-in amplifier. Active speakers have an internal power amp, so they can be plugged directly into a mixer or signal source.
How should I position the speaker for best sound?
Place the speaker at ear level if possible, or use a pole mount. Keep it away from walls and corners to reduce bass boom. For a live sound setup, angle it slightly downward toward the audience.
What if there's no sound coming from the speaker?
Check the cable connections first, then verify that the amplifier is powered and the correct channel is selected. Also ensure the speaker's impedance selector (if any) matches the amplifier. Test with another cable and source.
Can I use this speaker for karaoke or live vocals?
Absolutely, the CXP-115 is designed for PA use and works well for vocals, instruments, and playback. A good microphone and proper gain setting will give clear and loud sound.
How can I clean and maintain the speaker?
Turn off all equipment and unplug the speaker. Wipe the cabinet with a soft, dry cloth. Avoid using solvents or water inside the grille. Check screws and connections periodically for tightness.
What is the recommended speaker cable gauge?
For lengths up to 15 m, use 1.5 mm² (16 AWG) or thicker. For longer runs, use 2.5 mm² (14 AWG) or larger to minimize power loss and ensure safe operation.
Is the CXP-115 weather-resistant?
No, the CXP-115 is not weatherproof. It should be used indoors or protected from direct rain, moisture, and extreme humidity to avoid damage to the drivers and cabinet.
How do I mount the speaker on a tripod stand?
Insert the 36 mm pole tip into the socket on the bottom of the speaker. Secure the pole lock ring, tilt the speaker downward slightly for optimal coverage. Always ensure the stand is rated to support the weight of 21 kg.
User questions about CXP-115 Laney
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual CXP-115 - Laney and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CXP-115 by Laney.
USER MANUAL CXP-115 Laney
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Laney
Model : CXP-115
Category : Loudspeaker