PE-LMA328DM - Blender Peabody - Free user manual and instructions
Find the device manual for free PE-LMA328DM Peabody in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Blender |
| Brand | Peabody |
| Model | PE-LMA328DM |
| Rated power | 500 W |
| Power supply | 220-240 V ~ 50/60 Hz |
| Jug capacity | 1.5 L |
| Jug material | Glass |
| Blade material | Stainless steel |
| Number of speeds | 5 + Pulse |
| Control type | Rotary dial |
| Safety lock | Lid safety lock |
| Motor protection | Overload protection |
| Non-slip feet | Yes |
| Removable blade assembly | Yes |
| Dishwasher safe parts | Jar, lid, blade assembly |
| Dimensions (H × W × D) | 38 × 20 × 18 cm |
| Net weight | 2.4 kg |
| Cord length | 1 m |
| Cleaning | Quick-clean with soapy water |
Frequently Asked Questions - PE-LMA328DM Peabody
How do I assemble the Peabody PE-LMA328DM blender?
Place the blade unit into the jug, then pour ingredients. Lock the lid until it clicks, and place the jug on the motor base. Ensure the safety lock is engaged.
Can I blend hot liquids in this blender?
It is not recommended to blend hot liquids above 60°C, as steam pressure can force the lid off and cause burns. Let liquids cool before blending.
How do I clean the blender after use?
Fill the jug halfway with warm water, add a drop of dish soap, and run the blender for 30 seconds. Rinse thoroughly. Remove the blade unit for a deep clean. Most removable parts are dishwasher safe.
What is the pulse function used for?
Pulse gives short bursts of maximum power to chop ingredients evenly without over-processing. Ideal for nuts, ice, or mixing quickly.
Why is my blender leaking?
Leaks usually occur when the lid is not locked properly or the blade unit seal is worn. Check the rubber gasket and ensure the lid clicks. Do not overfill beyond the max line.
Can I crush ice with this blender?
Yes, use the pulse mode with a little water to help the blades move. Crushing ice can be done at high speed only in short bursts to avoid dulling the blades.
How do I disassemble the blade unit for cleaning?
Turn the blade coupling counterclockwise to unlock it from the jug, then pull it out. Wash in warm soapy water. Handle the sharp blades with caution.
The motor stops suddenly during use. What should I do?
The blender has a thermal cut-off. Unplug it and let it cool for about 20 minutes. Reduce the load and never run it for longer than 3 minutes continuously.
Where can I find replacement parts?
Contact Peabody customer service or visit the official website. Common spare parts like the jug, lid, and blade assembly are available.
Can I use this blender at 110V?
No, the PE-LMA328DM is designed for 220-240V. Using it on a different voltage can damage the motor. Use a suitable converter if necessary.
User questions about PE-LMA328DM Peabody
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Blender in PDF format for free! Find your manual PE-LMA328DM - Peabody and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PE-LMA328DM by Peabody.
USER MANUAL PE-LMA328DM Peabody
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Peabody
Model : PE-LMA328DM
Category : Blender