810118 - Uncategorized Bulbrite - Free user manual and instructions
Find the device manual for free 810118 Bulbrite in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Bulbrite |
| Model | 810118 |
| Product Type | LED light bulb |
| Technology | LED solid-state lighting |
| Base Type | E26 medium screw base |
| Operating Voltage | 120 V AC, 60 Hz |
| Wattage Equivalent | Replaces a 60 W incandescent bulb |
| Color Temperature | Warm white, approximately 2700 K |
| Luminous Flux | Approximately 800 lumens |
| Beam Angle | Wide distribution, about 120 degrees |
| Dimming | Works with compatible LED dimmers |
| Instant Start | Yes, reaches full brightness immediately |
| Lifespan | Approximately 15,000 hours |
| Energy Efficiency | Uses up to 80% less energy than incandescent |
| Heat Output | Low heat emission while operating |
| Housing Material | Aluminum heat sink and plastic diffuser |
| Dimensions | Diameter 60 mm, length 110 mm |
| Weight | Approximately 50 g |
| Maintenance | Wipe with a soft dry cloth |
| Cleaning | Disconnect power and allow to cool before cleaning |
| Safety | Keep away from materials that burn easily and do not use in enclosed fixtures unless rated |
| Recycling | Dispose of at an LED or electronic waste recycling center |
| Repairability | Non-serviceable; replace the bulb at end of life |
| Certifications | Suitable for standard dry indoor locations |
| General Information | Fits table lamps, ceiling fixtures, and pendant lights |
Frequently Asked Questions - 810118 Bulbrite
What is the Bulbrite 810118?
The Bulbrite 810118 is an energy-efficient LED light bulb designed for general household lighting.
What base does the Bulbrite 810118 use?
It uses a standard E26 medium screw base, which fits most common lamps and light fixtures.
Can the Bulbrite 810118 be used with a dimmer switch?
Many LED bulbs work with dimmers, but you should use an LED-compatible dimmer switch to avoid flickering or humming.
How do I install the Bulbrite 810118?
Turn off the power, insert the bulb into the socket, and rotate clockwise until it is secure. Restore power after installation.
How should I clean the Bulbrite 810118?
Use a soft, dry cloth to wipe the bulb. Always disconnect power and allow the bulb to cool before cleaning.
Can the Bulbrite 810118 be used outdoors?
Use it outdoors only inside a weatherproof fixture that is rated for outdoor conditions, unless the bulb specifically says otherwise.
How long does the Bulbrite 810118 last?
LED bulbs typically have a long service life of about 10,000 to 25,000 hours, depending on usage and operating conditions.
Is the Bulbrite 810118 repairable if it stops working?
The LED module is integrated and cannot be repaired safely. Replace the entire bulb and recycle the old one.
Does the Bulbrite 810118 produce heat?
It operates with low heat output compared with incandescent bulbs, but it does have an internal heat sink that may feel warm.
What should I do with the Bulbrite 810118 at end of life?
Dispose of it at a recycling location that accepts LED bulbs or electronic waste to recover valuable materials.
User questions about 810118 Bulbrite
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual 810118 - Bulbrite and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 810118 by Bulbrite.
USER MANUAL 810118 Bulbrite
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Bulbrite
Model : 810118
Category : Uncategorized