KTF-6002 - Headphones Kaiser - Free user manual and instructions
Find the device manual for free KTF-6002 Kaiser in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Over-ear wireless headphones |
| Brand | Kaiser |
| Model Number | KTF-6002 |
| Connectivity | Bluetooth 5.0 and 3.5 mm audio cable |
| Battery Capacity | 400 mAh |
| Playback Time | Up to 25 hours on a full charge |
| Charging Time | Approximately 2 hours |
| Charging Port | Micro USB |
| Frequency Response | 20 Hz - 20 kHz |
| Driver Size | 40 mm dynamic drivers |
| Impedance | 32 Ohms |
| Sensitivity | 105 dB |
| Microphone | Built-in with call function |
| Noise Cancellation | Passive noise isolation |
| Foldable Design | Yes, for easy portability |
| Weight | 250 g |
| Dimensions (W x H x D) | 190 x 170 x 80 mm |
| Ear Cushions | Replaceable and adjustable |
| Controls | On-ear buttons for volume, playback, and calls |
| Maintenance | Wipe with soft dry cloth; do not submerge |
| Safety Warning | Avoid listening at high volume to prevent hearing damage |
| Spare Parts | Replacement cushions and cables available via support |
| Warranty | 1 year limited warranty |
Frequently Asked Questions - KTF-6002 Kaiser
How do I pair the KTF-6002 with my phone?
Press and hold the power button for 5 seconds until the LED flashes blue and red, then select "KTF-6002" from your phone's Bluetooth settings.
How long does the battery last?
The battery provides up to 25 hours of playback time on a full charge. Charging takes about 2 hours.
Can I use the headphones while they are charging?
Yes, you can continue listening while charging, but it may take longer to reach full battery. The audio cable also allows passive use when the battery is empty.
How do I reset the KTF-6002?
Turn off the headphones, then press and hold the power button and the volume button simultaneously for 10 seconds until the LED blinks two times. This clears the pairing list.
Are the ear cushions replaceable?
Yes, the ear cushions are replaceable. You can gently pull them off and attach new ones. Spare cushions can be ordered from Kaiser support.
How do I clean the headphones?
Use a soft, dry, lint-free cloth to wipe the ear cushions and headband. Do not use water, solvents, or submerge the headphones in any liquid.
Can I connect the headphones to a TV?
Yes, if the TV supports Bluetooth audio, you can pair the headphones. Alternatively, use the included 3.5 mm audio cable to connect directly.
What should I do if the left side suddenly stops working?
First, check the audio balance in your device settings. If the issue persists, perform a reset and ensure the cable is fully plugged in. If the problem continues, contact support for repair options.
Is the microphone suitable for calls?
Yes, the built-in microphone is designed for hands-free calls. It provides clear voice pickup and can be used with virtual assistants.
How do I switch between Bluetooth and auxiliary mode?
Connect the 3.5 mm cable to the headphones and the device. The headphones automatically switch to auxiliary mode when a cable is plugged in, even if Bluetooth is active.
User questions about KTF-6002 Kaiser
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Headphones in PDF format for free! Find your manual KTF-6002 - Kaiser and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KTF-6002 by Kaiser.
USER MANUAL KTF-6002 Kaiser
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Kaiser
Model : KTF-6002
Category : Headphones