LYDOS HYBRID 80 - Electric water heater Ariston Thermo - Free user manual and instructions
Find the device manual for free LYDOS HYBRID 80 Ariston Thermo in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Ariston Thermo |
| Model | LYDOS HYBRID 80 |
| Product Type | Hybrid Electric Water Heater |
| Tank Capacity | 80 Litres |
| Power Supply | 230 V / 50 Hz |
| Heat Pump Power | 400 W |
| Electric Backup Power | 1500 W |
| Maximum Hot Water Temperature | 65 °C |
| Energy Efficiency Rating | A+ |
| COP (Coefficient of Performance) | Up to 3.5 |
| Tank Material | Enamelled Steel |
| Insulation | Polyurethane Foam |
| Control Panel | Electronic with LCD Display |
| Installation Type | Wall Mounted |
| Dimensions (Height x Width x Depth) | 1300 x 600 x 600 mm |
| Net Weight | 65 kg |
| Safety Features | Overheat Protection, Pressure Relief Valve |
| Maintenance | Annual Anode Check |
| Warranty | 5 Years (Tank) |
| Spare Parts Availability | 10 Years |
Frequently Asked Questions - LYDOS HYBRID 80 Ariston Thermo
How does the hybrid heating system work?
The LYDOS HYBRID 80 uses a heat pump as the primary heating source, extracting heat from the surrounding air. It automatically switches to the electric backup element when high water demand requires faster heating.
What is the recommended setting for energy savings?
For optimal efficiency, set the target temperature to 50-55°C. This maximizes COP and reduces standby losses. Use the ECO mode if available.
How often should I perform maintenance?
Inspect the anode rod annually and replace it if severely depleted. Drain and flush the tank every 2 years to remove sediment and maintain performance.
Can I install this water heater myself?
Installation must be performed by a qualified technician. The unit requires proper electrical connections, water line hook-ups, and air clearance around the heat pump.
What does the anodic protection do?
The sacrificial anode electrolytically protects the steel tank from corrosion. It attracts corrosive elements, extending the lifespan of the water heater.
How long does it take to heat the full tank?
With the heat pump alone, heating 80 liters from 15°C to 65°C typically takes 5-7 hours. The electric backup reduces this time to about 2 hours.
Why is my water heater making noise?
Noises can be caused by mineral buildup on the heating element or water circulation in the heat pump loop. Descaling and bleeding air from the system usually resolves it.
What should I do if the display shows an error code?
Note the error code and consult the user manual. Common faults include sensor failures or overheating. Restart the appliance; if the code persists, contact technical support.
Is the water heater compatible with a solar water heating system?
Yes, the LYDOS HYBRID 80 can be integrated with solar thermal panels as a pre-heating source. This reduces electricity consumption further when combined with the heat pump.
How can I reset the appliance after a power outage?
After a power outage, the unit resumes operation automatically. If it doesn't, press the RESET button on the control panel for 3 seconds to restart the electronic controller.
User questions about LYDOS HYBRID 80 Ariston Thermo
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Electric water heater in PDF format for free! Find your manual LYDOS HYBRID 80 - Ariston Thermo and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LYDOS HYBRID 80 by Ariston Thermo.
USER MANUAL LYDOS HYBRID 80 Ariston Thermo
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Ariston Thermo
Model : LYDOS HYBRID 80
Category : Electric water heater