Be Quiet!

System Power 11 U - PC Power Supply Be Quiet! - Free user manual and instructions

Find the device manual for free System Power 11 U Be Quiet! in PDF.

📄 2 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Be Quiet! System Power 11 U - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type PC Power Supply
Brand Be Quiet!
Model System Power 11 U
Series System Power 11
Form Factor ATX (PS/2)
Rated Power 550 W
Dimensions 150 x 140 x 86 mm (W x L x H)
Weight 1.4 kg (approximately)
Input Voltage 100-240 VAC, 50/60 Hz
Efficiency 80 PLUS Bronze certified (up to 88% at 230V)
Cooling System 120 mm be quiet! fan with FDB bearing
Noise Level Very low noise: < 18 dB(A) max
Mainboard Connector 24-pin ATX (20+4)
CPU Connector 4+4 pin (8 pin) ATX 12V
PCIe Connectors 2 x 6+2 pin for graphics cards
SATA Connectors Up to 6 SATA outputs
Peripheral Connectors 3 x 4-pin Molex
Protection Features OVP, UVP, SCP, OPP
Safety Instructions Do not disassemble; keep away from liquids
Maintenance Clean ventilation slots with a dry cloth
Repairability Fixed cables; service only by qualified technicians
Operating Temperature 0-40 °C
General Information Standard ATX mounting bracket included

Frequently Asked Questions - System Power 11 U Be Quiet!

What is the rated power of the Be Quiet! System Power 11 U?
This model delivers a continuous rated power of 550W.
Is the System Power 11 U 80 PLUS certified?
Yes, it is 80 PLUS Bronze certified, ensuring high efficiency across typical loads, reducing heat and energy costs.
Are the cables modular?
No, the System Power 11 U uses a non-modular cable design, meaning all cables are permanently attached. This simplifies installation but requires careful cable management.
What connectors are included?
It provides a 20+4 pin mainboard connector, a 4+4 pin CPU power connector, two PCIe 6+2 pin connectors for graphics cards, up to 6 SATA connectors, and 3 Molex peripheral connectors.
What safety protections are built in?
The unit features OVP (Over-Voltage Protection), UVP (Under-Voltage Protection), SCP (Short-Circuit Protection), and OPP (Over-Power Protection) to keep components safe.
How do I clean the power supply?
Use a dry soft cloth to wipe the exterior. For dust accumulation, gently vacuum the ventilation slots while keeping the unit unplugged. Do not use water or solvents.
Can this PSU handle a high-end graphics card?
With two PCIe 6+2 pin connectors and a 550W capacity, it can power most mid-range to high-end graphics cards. Extremely power-hungry GPU configurations may require a higher wattage PSU.
What should I do if my PC shuts down suddenly?
Check if the power supply is overloaded. Ensure that the total system consumption is below the rated wattage. Also verify all cable connections and that the PSU fan is spinning properly.
Is the power supply quiet?
Yes, be quiet! designs for quiet operation. The 120mm fan with fluid-dynamic bearing operates with low noise (< 18 dB(A)), making it ideal for silent builds.
What is the warranty period?
Be Quiet! typically offers a 3-year manufacturer's warranty for this series. Check your retailer for exact terms and conditions.

User questions about System Power 11 U Be Quiet!

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your PC Power Supply in PDF format for free! Find your manual System Power 11 U - Be Quiet! and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. System Power 11 U by Be Quiet!.

USER MANUAL System Power 11 U Be Quiet!

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Be Quiet!

Model : System Power 11 U

Category : PC Power Supply