SMX43KAFW - Television SANSUI - Free user manual and instructions
Find the device manual for free SMX43KAFW SANSUI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Full HD LED Television |
| Brand | Sansui |
| Model | SMX43KAFW |
| Screen Size | 43 inches |
| Display Resolution | 1920 x 1080 pixels (Full HD) |
| Display Technology | Direct-lit LED |
| Refresh Rate | 60 Hz |
| Audio Power Output | 2 x 10 W |
| Audio Enhancement | Dolby Audio compatible |
| HDMI Ports | 3 x HDMI |
| USB Ports | 2 x USB |
| Other Connectivity | VGA, AV input, RF antenna, headphone jack |
| Built-in Tuner | DVB-T2/C/S2 |
| Smart TV Features | No (standard television) |
| Wall Mount VESA | 200 x 100 mm pattern |
| Power Supply | AC 100-240V, 50/60Hz |
| Power Consumption (Typical) | 75 W |
| Standby Power Consumption | Less than 0.5 W |
| Dimensions (with Stand) | 967 x 600 x 180 mm |
| Dimensions (without Stand) | 967 x 560 x 80 mm |
| Weight (with Stand) | 6.8 kg |
| Weight (without Stand) | 6.3 kg |
| Remote Control Included | Yes, with batteries |
| Cleaning and Maintenance | Clean with a dry soft cloth; avoid direct liquid contact |
| Safety Compliance | CE, RoHS certified |
Frequently Asked Questions - SMX43KAFW SANSUI
How do I connect external devices like a cable box or gaming console to my Sansui SMX43KAFW TV?
Use the HDMI ports on the back or side of the TV. Simply plug the HDMI cable into the device and the TV, then press the SOURCE button on the remote to select the corresponding HDMI input. For older devices, you can use the AV (composite) or VGA connections.
Why is there no sound from the TV speakers?
First check that the volume is not muted. Press the VOL+ button on the remote and ensure the volume level is above zero. If you are using an external audio device via the headphone jack or HDMI ARC, make sure it is properly connected. Also verify that the TV is not in External Speaker mode in the audio settings.
How do I tune in digital channels after moving to a new area?
Press the MENU button, go to Channel or Tuner Settings, and select Auto Tuning. The TV will scan for available DVB-T2/C/S2 channels. Make sure the antenna or cable is connected firmly, then run the scan. This typically takes a few minutes.
Can I mount the Sansui SMX43KAFW on a wall?
Yes, the TV is VESA-compatible with a 200 x 100 mm mounting pattern. Use a certified wall mount kit that supports a 43-inch TV and a weight of at least 6.8 kg. Always follow the instructions provided with the wall mount and check that the wall is sturdy.
What should I do if the remote control is not working?
First, check the batteries and replace them if needed. Make sure there are no obstructions between the remote and the TV's IR receiver. Point the remote directly at the TV from a distance of less than 8 meters. If it still doesn't work, try resetting the TV by unplugging it for 2 minutes and then powering it on again.
How do I reset the TV to factory settings?
Press MENU, navigate to System or Settings, select Reset or Factory Reset, and confirm your choice. This will erase all custom settings and re-tune channels. Ensure you remember your password if you set one, as the default password is usually 0000.
What screen resolutions are supported by the HDMI inputs?
The HDMI inputs support signals up to 1080p (1920x1080) at 60Hz. Lower resolutions like 720p, 480p, and standard PC resolutions are also accepted. For best picture quality, set your external device to output 1080p.
How can I clean the television screen safely?
Turn off the TV and unplug it. Use a soft, dry microfiber cloth to gently wipe the screen in a circular motion. Do not spray any liquid directly onto the screen; instead, slightly dampen the cloth with water if needed. Avoid using cleaner containing alcohol or ammonia as these may damage the anti-glare coating.
Why does the TV take a long time to turn on?
The LED backlight may require a few seconds to warm up. If the TV is slow to respond, try resetting it by unplugging from the power outlet for about 1 minute. Also, check that the main power switch (if any) is on, and that the standby LED indicates the TV is in standby mode when you press the power button.
Can I use this TV as a computer monitor?
Yes, the SMX43KAFW can be used as a monitor via the VGA (PC) port or an HDMI connection. Set your computer's resolution to 1920 x 1080 for the sharpest image. You may also need to adjust the picture settings to 'PC' mode to reduce overscan, if available in the settings.
User questions about SMX43KAFW SANSUI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Television in PDF format for free! Find your manual SMX43KAFW - SANSUI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SMX43KAFW by SANSUI.
USER MANUAL SMX43KAFW SANSUI
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SANSUI
Model : SMX43KAFW
Category : Television