Fera 3 EVO ARGB - Cooler SilentiumPC - Free user manual and instructions
Find the device manual for free Fera 3 EVO ARGB SilentiumPC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | CPU Air Cooler |
| Brand | SilentiumPC |
| Model | Fera 3 EVO ARGB |
| Compatibility | Intel LGA 1700/1200/115x, AMD AM5/AM4 |
| Number of Heat Pipes | 4 |
| Fan Size | 120 mm |
| Fan Speed | 500 - 1600 RPM (PWM) |
| Bearing Type | Hydraulic Bearing |
| Noise Level | 8.5 - 24 dBA |
| ARGB Lighting | Yes, 5V 3-pin addressable |
| Power Connector | 4-pin PWM fan connector |
| Dimensions | 100 x 130 x 155 mm (with fan) |
| Weight | 490 g |
| TDP Rating | Up to 180 W |
| Main Features | Efficient cooling, ARGB lighting, easy mounting |
| Care and Cleaning | Clean the heatsink and fan with compressed air or a soft brush periodically |
| Safety | Ensure the cooler is securely mounted and the fan is unobstructed |
| Spare Parts | Replacement fans and mounting kits may be available |
| General Information | Designed for quiet and efficient cooling in gaming PC builds |
Frequently Asked Questions - Fera 3 EVO ARGB SilentiumPC
What CPU sockets are compatible with the Fera 3 EVO ARGB?
The Fera 3 EVO ARGB supports Intel LGA 1700/1200/115x and AMD AM5/AM4 sockets.
Does the fan speed adjust automatically?
Yes, the cooler uses a 4-pin PWM fan that allows automatic speed control from 500 to 1600 RPM based on CPU temperature.
How do I install the cooler on an AMD AM5 socket?
Use the provided AMD mounting bracket, attach it to the motherboard backplate, apply thermal paste, then screw the cooler onto the bracket.
Can I replace the fan on the Fera 3 EVO ARGB?
Yes, the fan is removable and can be replaced with a standard 120mm fan if needed.
How do I customize the ARGB lighting?
Connect the 5V 3-pin ARGB cable to a compatible motherboard header or RGB controller. Use software like MSI Mystic Light or ASUS Aura Sync to control effects.
What maintenance does this cooler require?
Periodically remove dust from the heat sink and fan blades using compressed air or a soft brush. Ensure proper airflow in the case.
What is the maximum TDP for this cooler?
The Fera 3 EVO ARGB is rated for CPUs with a TDP up to 180W, making it suitable for mid-range and some high-end processors.
Is thermal paste pre-applied?
Yes, the cooler typically includes a pre-applied thermal paste on the cold plate, but additional paste can be used for reinstallation.
Can I control ARGB lighting without a motherboard?
You can use an included or separately purchased ARGB controller that does not require motherboard software.
Will the cooler interfere with RAM modules?
The cooler is designed with a slim profile and offset fan mounting, providing good clearance for most memory modules, but low-profile RAM is recommended for optimal space.
User questions about Fera 3 EVO ARGB SilentiumPC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Cooler in PDF format for free! Find your manual Fera 3 EVO ARGB - SilentiumPC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Fera 3 EVO ARGB by SilentiumPC.
USER MANUAL Fera 3 EVO ARGB SilentiumPC
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SilentiumPC
Model : Fera 3 EVO ARGB
Category : Cooler