WFL2063EE - Washing machine BOSCH - Free user manual and instructions
Find the device manual for free WFL2063EE BOSCH in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Front-loading washing machine |
| Brand | BOSCH |
| Model number | WFL2063EE |
| Load capacity | 6 kg |
| Maximum spin speed | 1200 rpm |
| Energy efficiency class | A+++ |
| Width | 60 cm |
| Depth | 59 cm |
| Height | 85 cm |
| Weight | 65 kg |
| Voltage | 220-240 V |
| Frequency | 50 Hz |
| Water consumption per cycle | 45 L |
| Annual energy consumption | 152 kWh |
| Display type | LED display |
| Number of programs | 15 |
| Key programs | Cotton, Synthetics, Delicates, Wool, Quick 15 min |
| Drum material | Stainless steel |
| Noise level (wash) | 54 dB(A) |
| Noise level (spin) | 76 dB(A) |
| Features | AquaStop, foam detection, unbalanced load detection, drum cleaning reminder |
| Safety | Child lock, water protection system |
| Maintenance | Clean pump filter, descaling, drum cleaning |
| Spare parts availability | 10 years |
Frequently Asked Questions - WFL2063EE BOSCH
How do I clean the detergent drawer?
To clean the detergent drawer, remove it by pressing the release button and pulling it out. Rinse it under warm water and use a soft brush to remove residue. Clean the drawer compartment with a damp cloth. Reinsert it fully until it clicks. Doing this regularly prevents detergent buildup and ensures optimal washing results.
What is the maximum spin speed of this washing machine?
The maximum spin speed is 1200 rpm. You can adjust the spin speed according to the fabric type using the spin speed selector. A higher spin speed reduces drying time but may increase creasing for delicate fabrics.
How can I descale the washing machine?
Descaling should be done regularly to remove limescale. Pour a descaling agent into the detergent drawer and run an empty cotton program at 60°C or 90°C. Alternatively, use a washing machine cleaner with a dedicated drum cleaning program. Do not mix descaling agents with bleach.
What should I do if the washing machine is not draining?
First, check if the drain hose is kinked or blocked. Then clean the pump filter. Unplug the machine, open the pump cover, place a container underneath, and unscrew the filter. Remove any debris. Also check the drain pump for obstructions. If the problem persists, contact a technician.
How do I use the Quick Wash program?
The Quick Wash program is designed for lightly soiled clothes. Select the Quick 15 min or Quick 30 min program depending on your model. Add detergent as usual, but use less since the cycle is short. Do not overload the drum for best results.
What is AquaStop?
AquaStop is a water protection system that prevents water damage. It uses a special inlet hose with a solenoid valve and a floor tray with a float switch. If a leak is detected, the machine stops filling and the pump activates. This feature provides 24/7 protection against water damage.
How often should I clean the drum?
Clean the drum every 2-3 months or when the drum cleaning reminder appears. Use a drum cleaning program or run a cotton cycle at 90°C with a washing machine cleaner. Also leave the door ajar after each wash to prevent mold and odors.
How do I install the washing machine properly?
Remove all transport bolts from the back before installation. Place the machine on a level, stable surface. Adjust the feet to ensure it is perfectly level. Connect the water inlet hose to the tap and the drain hose to a standpipe or sink. Ensure the voltage matches your supply. Do not plug in until fully installed.
Why is my washing machine vibrating excessively during the spin cycle?
Excessive vibration is often caused by an unlevel machine or unbalanced load. Check that the machine is level and the lock nuts on the feet are tightened. Also, redistribute the laundry evenly inside the drum. Remove any transport bolts if they were not taken out.
How do I read error codes on the display?
Error codes appear as an E followed by a number or a blinking indicator. Refer to the manual for a complete list. Common codes include E03 for pump/drain issues and E18 for excessive foam. If the code persists, note it down and contact Bosch customer service.
User questions about WFL2063EE BOSCH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Washing machine in PDF format for free! Find your manual WFL2063EE - BOSCH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WFL2063EE by BOSCH.
USER MANUAL WFL2063EE BOSCH
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BOSCH
Model : WFL2063EE
Category : Washing machine